Installation Sheet

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
[phone] • [phone]
www.americanspecialties.com
MODEL №:
ISSUED:
REVISED:
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
RECESS MOUNTED STAINLESS STEEL HORIZONTAL BABY CHANGING STATION (Pg 1 of 2)
9018
08-13
17 APR 2019
SPECIFICATION
Recess Mounted Stainless Steel Horizontal Baby Changing Station shall protrude no more than 3/8" [10] from wall
when in retracted position. Unit shall comply with ASTM F2285-04 and EN 12221-1. Unit shall support a static
load of 300 lbs (136,1 kg) and be tested in excess of 350 lbs (158,8 kg). Unit shall be fabricated of non-porous plastic
(FDA approved HDPE) tested according to ASTM G21 and ASTM G22. Unit shall contain a door facing and wall
flange dress trim of satin finished 18 gauge [1,3] type 304 stainless steel. No parts of the operating mechanism shall
be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user environment. Unit shall
have a damped gas spring to assist user in opening and closing bed tray with the use of one hand. Unit shall be pro-
vided with one integral heavy-duty bag hook. Unit shall provide a bed-liner dispenser that may be easily converted to
a multi-fold towel dispenser with no adapters. Unit shall provide graphics and instructions in four languages on interi-
or back. Unit shall be provided with an adjustable two-part vinyl coated child protection safety-strap mounted with
concealed fasteners on high walls of cradle. Entire unit shall be assembled of completely sealed components to pro-
vide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall mount on standard stud wall
dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be con-
cealed after installation using color matched recess plug-covers supplied. Unit bed tray and back shall be light grey in
color and entire unit shall be recyclable at end of usable life. Unit shall be warranted for five (5) years against defects
in material or workmanship.
Recess Mounted Stainless Steel Horizontal Baby Changing Station shall be Model № 9018 as manufactured by
American Specialties, Inc., 441 Saw Mill River Road, Yonkers, NY 10701-4913
39-5/32"
[994]
28-1/4"
[718]
16"
[406]
13"
[330]
32-5/8"
[829]
BAG HOOK
SAFETY STRAP
27" [686] AFF
30-1/4" [768] AFF
24-1/4"
[616]
13"
[330]
LINERS AND TOWELS
DISPENSER
OPTIONAL
MOUNTING HOLES
WITH PLUG COVERS
SAFETY
INSTRUCTIONS
18-1/8"
[460]
7/8"
[22]
6-1/4"
[159]
3-15/16"
[100]
3/8"
[10]
35-5/32"
[893]
5-3/8"
[136]
SIDE FRAMED RWO
MOUNTING HOLES
(TYP)
45" [1143]
AFF
FINISHED FLOOR
C
L
C
L
C
L
C
L
C
L
C
L
NOTE:
ALL DIM’S INCH [MM]
ILLUSTRATION FOR REF ONLY AND NTS