Specifications Sheet

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, NY 10701
[phone] • [phone]
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
TODDLER SAFETY SEAT (PAGE 1 OF 2)
MODEL №: 9020
ISSUED: 11/13
REVISED: 21 MAR 2014
SPECIFICATION
Toddler Safety Seat shall be durable, non-porous, FDA approved high-density polyethylene. Unit shall comply
with 2010 ADA Accessibility Standards. Unit shall support a static load of 50 lbs (22.7 kg). No parts of the oper-
ating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user
environment. Unit shall have a three-point adjustable child protection safety belt and the shoulder harness straps
shall be individually attachable. Mounting fasteners shall be concealed after installation using black recess plug-
covers (supplied). Unit shall be light grey in color and shall be recyclable at the end of usable life. Unit shall pro-
vide ANSI Z535 compliant graphics and instructions in four languages on interior back. Unit shall be warranted
for five (5) years against defects in material or workmanship.
Toddler Safety Seat shall be Model № 9020 as manufactured by American Specialties, Inc., 441 Saw Mill
River Road, Yonkers, NY 10701-4913
INSTALLATION
Surface mount the unit with proper anchoring on all suitable wall constructions using hardware (by others)
through recessed mounting holes provided. Installation instruction sheet is provided with each unit. To ensure
proper installation and compliance with building codes it is recommended that a qualified person install the unit.
Wall reinforcement must be suitable to sustain transfer of maximum unit loading. Mounting hole plug covers are
supplied to conceal fasteners after installation. For compliance with 2010 ADA Accessibility Standards install the
unit so that the top of seat is 15" (381) maximum above finished floor (MAX AFF).
21-3/4"
[552]
2
1
2
"
[64]
3
4
"
[19]
12-1/8"
[308]
20-1/2"
[521]
21-34/"
[552]
5-3/4"
[146]
8-1/2"
[216]
12-1/2"
[318]
NOTE:DIM'S
INCH [MM]
1/2"
[13]
TYP SIDES & BACK
11-1/8"
[283]
5-1/2"
[140]