User's Manual

MODAT-550A Mobile Data Collector
Page 18
3.5 I/O Connectors
The I/O connectors are protected by a rubber cover. Open the rubber cover before
connecting any peripheral devices to the MODAT-550A.
3.5.1 Headset Jack
The headset jack on the top panel enables the MODAT-550A to be connected to a
headset. Open the protective rubber cover to expose the headset jack before connection.
Figure 3-6: MODAT-550A Headset Jack
3.5.2 Micro USB Connector
The MODAT-550A is equipped with a Micro USB connector that allows connection to a
computer or the supplied power adapter. Refer to Step 1 ~ Step 3 in Section 0 to connect
the MODAT-550A to a computer or power adapter by using the supplied Micro USB cable.
After connecting the MODAT-550A to a computer, follow the steps below to allow
transferring files between the computer and MODAT-550A.
Step 1: Swipe down from the top of the screen, then tap USB for file transfer
(Figure 3-9).