User's Manual

59/63
EAP-FAST:
1. Select EAP-FAST from the Authentication type drop-down list. Key-in the identity
as "wpatest2" and a domain name into the blank field. The tunnel identity is
"wpatest2" and password is "test2". These setting are the same as our intended AP's
setting.
2. Click to the next page.
3. If the connection is successful, the dialog box will appear as the image below.
*If you want to disconnect, please click "Cancel" on the Authentication Status function page.
*In Profile function, show "Profile Name" option only in adding AP to Profile function.