Operation Manual

OTHER FUNCTIONS THAT CAN BE SET IN TIME MODE
TIME MODE
Selection of Time Zone
Turning ON/OFF of Button Operation Conrmation Sound
Battery Life Indicator Function
8
Button Operation Conrmation Sound mark
Time Zone mark
This function enables you to know when the battery needs to be
replaced.
The remaining life of the battery is shown graphically in three
levels.
* The battery mark “ ” indicates that the battery is nearing
its end. When it is shown, replace the battery with a new one
immediately.
Battery mark
Button “B”:
Mode change
Button “B”:
[Press for more
than 2 seconds]
Activation of Time
Setting Display
Button “A”:
Turning ON/OFF of
Button Operation
Conrmation Sound
Button “C”:
Turning on backlight
Button “D”
Button “E”:
[Press for more
than 2 seconds]
Selection of Time Zone
(T1/T2)
With each press of Button “A”, the Button
Operation Conrmation Sound turns ON and OFF
alternately. When it is turned ON, the Button
Operation Conrmation Sound mark “ ” is
shown.
* When the display is returned to the TIME Mode, and when the data of the
latest run is displayed, and the total time display is shown in the HR-LOG
Mode, by pressing a button, the Button Operation Conrmation Sound
rings differently from usual.
With each continuous press of Button “E” for
more than 2 seconds, the time zone changes
over between T1 and T2. The dual time function
is convenient during trip abroad. The Time
Zone mark (T1 or T2) indicates the time zone
selected.
AH01-WJ30WJ31_英語版.ai 1 2013/02/24 21:30:26