Operation Manual

CHRONOGRAPH MEASUREMENT PROCEDURE
HR-CHR MODE
During running, the watch indicates heart rate automatically besides measuring lap and split times with button operation.
Chronograph Measurement
SPLIT 2
SPLIT 1
LAP 1
LAP 2
LAP 10
LAP 3 ∼ LAP 9
SPLIT 10 = Total time
SPLIT 9
SPLIT 3 ∼ SPLIT 8
* During measurement, stop and restart can be repeated as many times as necessary by
pressing Button A.
* When the chronograph is reset by pressing Button “E”, the measured data is stored in
memory as log data.
Display can be changed during measurement
Selection of Measurement Display
Measurement with watch alone:
Measurement when chest strap is worn:
Each time Button “E” is pressed to measure a lap time, the lap time measured
remains displayed for 6 seconds.
9
* While the lap time remains displayed, the lap
No. and the heart rate are shown alternately.
* Once “FULL” is displayed, no more lap data
is stored in memory (see p. 10).
*
When the lap time in progress exceeds 1
hour, the lap time indication “LP” disappears.
SPLIT 2
LAP 2
* When the HR-CHR Mode appears, “HR-CHR” is shown in the upper row of the
display for 1 second, and then, the Chronograph Display appears.
Button “B”:
Mode change
Button “C”:
[Press for more
than 2 seconds]
Returning display to
TIME Mode
Button “A”:
Start/Stop
Button “C”:
Turning on backlight
Button “E”:
Lap/Reset
Button “D”:
Selection of
measurement display
Heart rate Heart rateHeart rate
Lap time
Display can be changed during measurement
Split time
* Split time is shown for 6 seconds when the
chronograph is started, stopped and reset.
Current
time*
Lap time
Split time
Lap time
Split time
Lap time
Split time
Current time
Current time
Display Immediately After Lap Time Measurement
Start
Finish
Start
Lap
Lap
Lap
Stop
Reset
Run
Stop
Restart
Running interrupted
1*: Measurement is halted.
1*
Lap time: Time required to run any given section of the entire distance.
(Ex.: Time required to run a circuit in a track race)
Split time: Time required to run from the start to any given point of the entire distance.
(Ex.: Time required to reach 10 or 20 km point of a marathon)
Total time: Entire time to run from start to nish (excluding the time while the
measurement is halted).
Run: A running attempt measured by the chronograph from when it is
started until it is nally stopped and reset.
Lap time
Lap No.
Chronograph mark
AH01-WJ30WJ31_英語版.ai 1 2013/02/24 21:30:52