Operation Manual

18
GRAPHIC DISPLAY OF HEART RATE DATA
HR-GRAPH MODE
Transition of heart rate during the latest run is displayed graphically from start to nish.
Structure of Heart Rate Graph (Ex.: Interval Training)
Sampling Interval of Detailed Data
Detailed Data Display
* When the HR-GRAPH Mode appears, “HR-GRAPH”
is shown in the upper row of the display for 1
second, and then, the heart rate graph appears.
Button “B”:
Mode change
Button “A”:
Moving back detailed
graph
Button “C”:
Turning on backlight
Button “A”:
[Press for more
than 2 seconds]
Moving back detailed
graph quickly
Button “E”:
Returning to graph display
Button “C”:
[Press for more
than 2 seconds]
Returning display to
TIME Mode
Button “D”:
Advancing
detailed graph
Button “D”:
[Press for more
than 2 seconds]
Advancing detailed
graph quickly
* When no heart
rate data is stored
in memory, “- - - -”
is displayed.
* When the Chronograph
is in use, “CHR in USE”
is displayed.
* The data for the heart rate graph is updated each time a new chronograph measurement
is made. Even when the measurement is made with the watch alone without wearing
the chest strap, the data for the graph is updated, and “- - - -” is displayed.
Start
Finish
Time
Heart rate
Fast
Slow
Fast
Slow
Fast
Slow
Total time
Total time
Heart rate
Elapsed
time
Advancing ashing
portion
Moving back
ashing portion
Detailed Data Display
The interval of sampling the detailed data is adjusted automatically according to
the total time measured in the run as follows:
Total time measured
Sampling interval
15 minutes or so
30 minutes or so
1 hour or so
2 hours or so
4 hours or so
9 hours or so
16 seconds
32 seconds
64 seconds
128 seconds
256 seconds
512 seconds
The heart rate at each time point along the horizontal axis of the heart rate graph is
displayed numerically together with the time elapsed to that point.
[1] Press Button “D”. The leftmost bar of the heart rate graph starts ashing, and
the corresponding heart rate is shown numerically to the right of the graph. The
time elapsed to that time point is displayed in the lower row.
[2] With each press of Button “D”, the ashing portion advances to the right, and the heart rate
and the elapsed time at each time point are displayed. To move back the ashing portion,
press Button “A.”
* If Button “A” or “D” is kept pressed for more than 2 seconds, the ashing portion moves
quickly.
[3] Press Button “E” to return to the heart rate graph display with total time.
AH01-WJ30WJ31_英語版.ai 1 2013/02/24 21:33:40