Operation Manual
22
TO ESTIMATE YOUR MARATHON FINISH TIME
GOAL TIME MODE
● By inputting the running time for 5 or 10 km, the watch estimates your nish times for a half and full marathon using the algorithm developed by ASICS.
■ Marathon Time Display
■ To Reset Marathon Time
Beep♪
ṲẅInput of Running Data for 5/10 km
* 5/10 km data has not been input yet.
Marathon Time Display
Display to input running data for 5/10 km
[1] Keep Button “B” pressed for more than 2 seconds to show the display to input
running data for 5/10 km. The gender and distance start ashing.
[2]
Press Button “A” or “D” to set the ashing digits.
* If Button “A” or “D” is kept pressed for more than 2 seconds, the digits move quickly.
[3] Press Button “E” to show the next digits to be adjusted (ashing).
[4] Repeat Steps [2] and [3] to input the data in the order shown in the illustration below.
[5] After input of all the items are completed, press Button “B” to return to the
marathon time display.
* If the watch is left untouched in the display to input data with the digits ashing, the display will
automatically return to the marathon time display in 2 to 3 minutes.
Input your running time for 5 or 10 km to estimate your marathon time.
By inputting the running time for 5 or 10 km, the estimated nish times for a half and
full marathon are displayed.
● With each press of Button “E”, the estimated nish times and the input data are
displayed in the following order:
* If the AT-HR data is input in the HR-LOG Mode, the marathon time is estimated based on the
“BEST TIME” data even if the running time for 5/10 km is not set (see P. 20).
● By keeping Button “E” for more than 2 seconds in any of the marathon time
displays, “RESET” is displayed, and the estimated times and the input data will
be reset with conrmation beep.
* When the GOAL TIME Mode appears, “GOAL TIME” is shown in the upper row of
the display for 1 second, and then, the marathon nish time is displayed.
Button “B”:
Returning to marathon
time display
Button “A”:
Increasing digits to
be adjusted
Button “C”:
Turning on backlight
Button “C”:
[Press for more than 2 seconds]
Returning display to
TIME Mode
Button “B
”
:
[Press for more than 2 seconds]
Activation of running data
input display
Button “D”:
Decreasing digits to be adjusted
Button “E”:
[Press for more than 2 seconds]
Resetting marathon time
Button “E”:
・
Selection of setting items
・Displaying marathon time
Estimated
full marathon
nish time
Press for
more than
2 seconds.
Hour
Minute
Seconds
* Select gender/distance from
the pairs below.
* Setting range of running time:
0 ~ 1 hour, 59 minutes and
59 seconds
Gender/Distance
Estimated nish time
for a full marathon
Estimated nish time
for a half marathon
Running data input
Conrmation
beep
Press for
more than
2 seconds.
AH01-WJ30WJ31_英語版.ai 1 2013/02/24 21:34:51