Operation Manual

12
How to Use the Modes Available in Both SPM and PACE Functions
ALARM Mode
When the ALARM mode appears, “ALARM” is shown in the lower row of the dis-
play for 1 second before the alarm channel number (“AL-1”) is shown instead.
Engagement/disengagement of the alarm
The alarm of each channel can be engaged or disengaged indepen-
dently of one another.
When the alarm of any one of the channels is engaged, t
he ALARM
mark is displayed.
The alarm sounds at the designated time for 20 seconds.
To stop the alarm, press any of the buttons.
Selection of the alarm channel
 When the ALARM display is first shown, AL-1 (alarm channel No. 1) is displayed.
 The alarm sounds differently from channel to channel.
* The alarm sound can be tested by pressing button D.
* The alarm rings according to the time o
f the selected time zone (T1 or T2).
* When the display returns to the ALARM mode after the alarm setting procedure, the alarm is
engaged automatically.
Alarm time setting
Current time
ALARM mark
Designated alarm time
Button B: Mode change
Button C: Lighting
up backlight
Button D
: Alarm sound test
Button E
: Selection of alarm channel
󰽨
AL-1 AL-2 AL-3
󰽨
Button A: Engagement/
disengagement of alarm
󰽨
Button B (pressed for more than 2
seconds): Showing ALARM SETTING mode
Button B: Returning
display to ALARM mode
Button C: Lighting
up backlight
Button D: Decreasing
digits to be adjusted
Button E: Selection of
digits to be adjusted
Button A: Increasing
digits to be adjusted
Alarm time setting procedure
ALARM mode
MINUTE
* The alarm time can be set channel by channel.
HOUR
T1/T2
Press for more
than 2 seconds.
󰽨
󱂉
󰽨󰽨
󱂉
Instr uc tion Ma nua l
AP01 : WJ32