User's Manual

6
Reinsert reader front to
base by set the bottom.
Align reader pigtail cable
accordingly. Push to front
top to snap into the base.
Tighten bottom screw
1.6 Operation Guide
Keeping the card in parallel to the R380 reader a maximum read range
can be obtained. The Reader will still be able to read Card when the
card is presented at an angle but this will result in the reducing of read
range.
Card and PIN operation
a) In Card & Pin mode LCD screen prompt to Enter Pin, enter PIN
follows by “#” key
b) Key in PIN + 1 for PIN DURESS (Example PIN is 1234, for duress
activation, key pin 1235) Note that the maximum PIN is up to 6 digit.