SPECIFICATION TYPE: MODEL: FCC-ID NUMBER: Wireless Bluetooth Earbuds Asivio Vybe 2A3BX-VYBE
Vybe Wireless Bluetooth Earbuds Overview ■Bluetooth pairing name: Asivio Vybe ■FCC-ID number: 2A3BX-VYBE ■Vybe is a stereo Bluetooth earbuds that supports TWS functions. ■Use Airoha AB1536U Bluetooth chip as the core data processing, Bluetooth version is: V5.0 ■ Launch power: Class II, the range of use within 10 meters (the actual range depends on the device connected to it) ■ Frequency range: Bluetooth standard 2.402 ~ 2.
Product details 1.1. Product introduction ■ The Vybe is a TWS stereo wireless Bluetooth earbuds. the range of use within 10 meters (the actual range depends on the device connected to it). The Bluetooth version is: V5.0. ■ It can be connected to devices that support Bluetooth function (HFP, HSP, A2DP, AVRCP and other protocols). ■ The Vybe comes with the charging case can charging the earbud at any time.
1.2. Operation description 1. Power on: After opening the charging case, automatically turn on the earbud (automatically enter the TWS pairing state when the TWS pairing is not paired before). 2. Power off: Put the earbud into the charging case and close the lid for shutdown. 3. Enter the TWS pairing status: When the earbud is out of the factory and clear the pairing record, open the charging box lid to automatically enter the TWS state.
6. Previous song: Play the music state Double -click the "touch button" in the left ear switch the song. 7. The next song: Play the music state Double -click the "touch button" in the right ear to switch the next song. 8. Receive calls: The connected state, short press the "touch button" to answer the phone when you have an incoming call (both left and right ears). 9. Hanging the phone: During the call, short press the “touch button” to hang the phone (both left and right ears). 10.
19. Low-battery alarm: When the voltage of the earbud battery is lower than 3.45V, there is a prompt sound of "Battery_ Low" every 3 minutes. Remarks: In order to save power, except for the status indicator described below, there are no indicators in other states 20. Enter the brothers pairing status: white LED quickly flashes 21. Enter the Bluetooth pairing status: Host: White light flashes once every 3 seconds, auxiliary ear: white lights flash once every 10 seconds 22.
Conventional parameter table Bluetooth specification Operation frequency Supported profile Chip solution Bluetooth 5.0 2.402-2.480GHz HFP, HSP, AVRCP, A2DP Airoha AB1536 Decoding SBC Operation range UP to 10 meters Talk time Earbuds: about 3 hours (70%volume) Use with charging case: about 12 hours(70%volume) Music time Earbuds: about 4 hours (70%volume) Use with charging case: about 16 hours (70%volume) Standby time Earbuds:About 40 hours Battery type Earbuds:3.7V 40mAh*2 Charging case:3.
Prompt sound Status prompt sound Turn on Power on Turn off Power off Enter the pairing state pairing TWS pairing successfully TWS connected TWS pairing failed TWS Disconnected Bluetooth connection successfully connected Bluetooth disconnection Disconnected Low voltage alarm Battery Low
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.