User's Manual

Ｆ １０
Ｕｓｅｒ Ｍａｎｕａｌ
1. General function
Operation LED Status
Power on Blue LED flashes 3 times
Power off Red LED flashes 1 second
Pairing Red LED & Blue LED flashes alternately
Standby Blue LED flashes 1 times in 5 seconds
Low battery Red LED flashes
Charging Red LED keep lighting during charging
Blue LED keep lighting when charging finished
2. Basic Buttons Operation
Power on: Push button to on side. Blue LED flashes 3 times. Headphone
turn on.
Power off: Push button to off side. Red LED turn off after flashes 1 times.
Headphone turn off.
Paring: After power on, the headphone will be entered into pairing mode
automatically. Red LED & Blue LED flashes alternately. if not, long press
' Previous song' button for 3s to enter paring mode.
HOW TO USE
LED light / MIC
Micro USBAUX in
On / Off
Previous song
Forced pairing
Vol +
Next song
Vol -
Play / pause
Answer call
Refuse call
材质：128g书写纸
印刷：单色双面印刷
尺寸：见图档标注
折叠方式:风琴页折叠
100mm100mm
150mm
A
1. Bluetooth 5.0
2. 3.5mm music line-in function
3. iOS show the headphone battery power status
1. Stereo Bluetooth headphone x 1
2. Charging Micro USB Cable x 1
3. User Manual x 1
4. 3.5mm audio wire x 1
1. Connect the 3.5 audio wire to the headphone and audio player.
2. You can adjust volume bottom of the audio player or the mobile
phone to reach right volume to listen music.
Volume adjust: Long press on buttons,one level voice volume changes.
When volume reaches to Max or Minimum, "Di" reminding voice occurs.
Play / Pause: Short press button, music pause. Press it again, music
continues.
Previous: In playback status, press button, music turns to previous one.
Next: In playback status, press button, music turns to next one.
Answer Call: Short press button to answer the phone call.
End call: Short press button, phone call ended.
Reject call: Long Press button for 2 seconds to reject a call.
Battery Capacity status: When headphone connects to iOS devices,
iOS devices show the headphone battery power status on the upper right
corner.
Charging: new headphone has enough power for pairing and dialing
out for several times. When in low battery, please charging via USB cable
for 3~4 hours. Red LED keep lighting during charging, blue LED keep lighting
charging finished.
Reset Mode: Connect the headphone to computer via Micro USB cable.
When red LED light on, headphone reset finished.
3.5mm music line-in function: Connect Audio line in cable to 3.5 audio
jack for wired music. Phone call function cannot be used in this mode.
Headphone will be powered off after insert 3.5mm line-in cable.
1. You must choose a qualified charger from a regular manufacturer
to charge the headphone.
2. You must charge the headphone if it has not been used for more
than 12 months.
3.5MM AUDIO JACK
FEATURES
SPECIFICATION
KIT CONTENTS
WARNING
Talk time: 20h
Standby: 0.5mA
Battery: 400mAh
Standby time: 750h
Charging time: 3~4h
IC solution: QCC3005
Bluetooth: 5.0
Charging voltage: 5.0V
Wireless range: ≥10m
BT music play time: 20h
Power voltage: 3.0~4.2V
Speaker: φ40mm 32Ω ±15%
Transmission power: CLASS 2
Transmission frequency: 2.4G
Bluetooth: HSP / HFP / A2DP / AVRCP / SBC / AAC / APTX / PATXLL
Sound pressure level (Sensitivity): 108±3dB At 1kHz 1mw / IE
1
1
1
1
1
2
2
3
3
4
4
4