User's Manual

4
2, Basic Buttons Operation
Power on: Press multifunction button for 2 seconds. Blue LED flashes 2 times.
Headphone turn on.
Power off: Press multifunction button for 3 seconds. Red LED turn off after flashes 2
times. Headphone turn off.
Volume adjust: Each press on 'Volume up' or ' Volume down' buttons, one level voice
volume changes. When volume reaches to Max or Minimum,"Tick" reminding voice
occurs.
Play/Pause: Short press multifunction button, music pause. Press it again, music
continues.
Previous: in standby status, Long press 2 seconds 'volume down' button, music turns to
previous one.
Next:: in standby status ,Long press 2 seconds 'Volume up’, music turns to next one.
Answer Call: Short press multifunction button to answer the incoming call.
End call: Short press multifunction button, phone call ended.
Reject call: Press 'Volume up' button for 2 seconds to reject a call.
Transfer call: During the phone call conversation, press' Volume up 'button for 2
seconds, call switches to mobile phone. Press '
Volume up' button for 2 seconds again, call
switches to headphone.
Last number redial: in standby status, continuously press headphone multifunction
button twice to redial the last number.
Call Mute function: Press '
Volume down' button for 2 seconds, call mute. Press
'
Volume down' button for 2 seconds again, call mute cancel.
Battery Capacity status: When headphone connects to iOS devices, iOS devices show
the headphone battery power status on the upper right corner.
Charging: new headphone has enough power for pairing and dialing out for several
times. When in low battery, please charging via USB cable for 2 hours. Red LED keep
lighting during charging, blue LED keep lighting charging finished.
Reset Mode: Connect the headphone to computer via Micro USB cable. When red LED
light flashes, headphone reset finished.
3.5mm music line-in function
： Connect Audio line in cable to 3.5 audio jack for wired
music.
Active noise reduction function(ANC)
When there is too much noise in surroundings, Switch the ANC key to “ON
“ location ,ANC function can be enabled to reduce noise , providing listening pleasure of
high quality to users.
Phone call function cannot be used in this mode
The headphone is on or off status
1, connect the 3.5 audio wire to the headphone and audio player.