Installation Manual

54Mbps 802.11g Wireless LAN Card

2. In the Wireless Network Properties window, configure the settings below:

Network name (SSID): Specifies the name of the Wireless LAN group you want to

participate in.

Network Authentication (Shared mode): Specifies the authentication type. You should

use the same setting as the other wireless stations in your target wireless network.

Wireless network key (WEP): If a network key is required, do the following:

• If the WEP key is automatically provided (for example, the key is stored on the

wireless network adapter given to you by your network administrator), check

The key is provided for me automatically check box.

• If the WEP key is not automatically provided for you, leave The key is provided

for me automatically check box blank and then enter the key in the Network

key field.

When entering the key, the Key format and Key length are changed automatically

according to the format and length of the characters you entered. When using

Hexadecimal format, only digits 0-9 and letters a-f, A-F are allowed. Make sure to enter

the character matching the required key format and length as below:

ASCII characters Hexadecimal digits

40 bit 5 alphanumeric characters 10 hexadecimal digits

104 bit 13 alphanumeric characters 26 hexadecimal digits