User's Manual

11Mbps Wireless LAN Card User's Manual
12
Installing the Hardware and Driver
Windows 98(SE)/Me/2000
After installing the Wireless LAN Card Software, plug the Wireless LAN Card into your
computer’s
PCMCIA slot/USB port. The Wireless LAN Card is powered on; no external
power is required.
Upon hardware detection, Windows OS will install the driver for the card automatically.
Note:
1. For Windows 2000: If you are prompted with the Digital Signature not Found alarm
message, just click
Yes to ignore it and continue with the auto-installation.
2. For Windows 98(SE): If prompted, you need to insert your Windows 98(SE) installation
CD to complete the driver installation.
For Windows 2000, you will
not see
Digital Signature
Not Found
message with the
setting below:
Control Panel > System
>Hardware > Driver
Signing
> Ignore- Install
the software anyway…
.
The red LED on the Wireless
LAN Card will light when
the Wireless LAN Card is
connected to your computer.