User's Manual

Copyright © Askey, INC. All rights reserved.
6
Quick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
EAI2001S Enterprise Access Point ENGLISH
3. Connect the DC power adapter to the EAI2001S power socket.
EAI2001S Uplink port is capable of receiving DC currents. Connect an IEEE 802.3at-compliant PSE device
(e.g. a PoE-switch) to the Uplink port of EAI2001S with the Ethernet cable.
Now, the Hardware Installation is complete.
• Using a different power adapter may damage this system.
• To verify the wired connection between EAI2001S and you switch / router / hub, please also
check the LED status indicator of the respective network devices.