User Manual

English
24
Resetting the Navigation System
Soft Reset
Choose this option if your navigation system is not responding or
working properly.
This option restarts the navigation system, without reinstallation
being necessary. A soft-reset is often used in order to reorganize
the memory. In doing so all programs that are running are inter-
rupted and the working memory is reinitialized.
Perform the soft-reset as follows:
Press the tip of the stylus into the soft-reset switch opening or
insert a pointy object (e.g. a paper clip, which has been bent
open) with slight pressure into the reset opening.
Hard Reset
Warning
A hard-reset deletes all data on your appliance and
causes a new initial installation.
It is not necessary to install the software on your synchronisation
computer again, however.
Perform the hard-reset as follows:
1. Remove the external power source.
2. Push the On/Off switch of the device on the back of the de-
vice first to the OFF position initially and back to ON after
2 seconds.
3. It will be necessary to carry out the software installation
again after a Hard Reset.