User Manual

Navigation

Note

Your navigation system can also be equipped alterna-

tively with another car mounting according to the ver-

sion.

1. Remove the protective foil from the sticky side of the suction

plate.

2. Fix the suction plate to a suitable location on the dashboard.

Take care, that the surface of the dashboard is clean and

press the suction plate strongly onto the surface.

Note

To obtain a strong and secure hold the suction plate

should not be used for 24 hours.

Note

It cannot be excluded completely that certain plastics,

strong solar radiation, etc. will affect or soften the ad-

hesive strips and will be able to damage the surface of

the dashboard through this.

We shall not accept any liability for damage to the

dashboard that may occur.

3. Connect the cradle to the car mounting. Pay attention to the

inscription on the car mounting. The connection closes with

a noticeable clicking sound (fig. see the next page).

II. Fixing the Suction Plate

Note

Clean the disk thoroughly with a glass cleaner. Warm

the disk and the nipple slightly at temperatures below

15° C.

Place the holder with the suction head onto the suction plate (or

directly onto the wind screen) and press the lever on the suction

head downwards. The sucker will attach itself to the background

firmly.