User Manual

English

II. Connecting with the PC

1. Press the On/Off button to start your navigation system.

2. Connect the USB cable (optional) to your navigation

system.

3. Push the USB connector into a free USB port on your com-

puter.

4. The hardware installation assistant recognizes now a new

appliance and installs a suitable driver which can take some

minutes. Repeat the die connection search if it fails the first

time.

5. Follow the instructions on the screen. The program will now

set up a partnership between your PC and the device.

III. Working with Microsoft

ActiveSync

will be started automatically if you connect your

navigation system to the PC. The program will check whether the

device is one with which a partnership has been entered. If this is

the case, the changes that have taken place on the PC and on the

navigation system since the last synchronisation will be compared

and adjusted to each other. You will be able to define exactly

which data will have priority during the synchronisation in the

settings of the ActiveSync

Program. Call up the Help of the Pro-

gram (with the F1 Button), in order to become familiar with the

effects of the respective settings. A restricted Guest Access, with

which you will be able to exchange data, for example, will become

active automatically if the navigation system has not been recog-

nised as a partner. If this is the case, although the process con-

cerns the registered partner device, separate your navigation sys-

tem from the PC and switch it off and on again. Now connect your

navigation system to the PC, to restart the recognition process.

Repeat the process and, restart your PC in addition, if your device

continues to be recognised as a guest.

Note: Make sure that you always connect your navigation system

to your PC with the same USB connection, otherwise your PC will

allocate an additional ID and reinstall the device.