User's Manual

Chapter 3: Connections and setup
9
Illustrations contained in this document are for representation only.
Connection to Computer and Telephone
Make the connections to modem in the following sequence:
z Connect the plug from the AC power supply into the POWER AC ADAPTER jack on the EMTA, and
plug the power supply into an AC outlet in the wall.
z Connect one end of the Ethernet cable to the Ethernet port on the back of your computer, and the
other end to the ETHERNET port on the EMTA.
Fig. 1: How to Setup Your Device
Note: Use only the power
supply that accompanied this
unit. Using other adapters
may damage the unit.