User's Manual
Chapter 3: Connections and setup
18
Illustrations contained in this document are for representation only.
DHCP
This page allows configuration and status of the optional internal DHCP server for the LAN.
You can activate the DHCP server function for the LAN on this page, with this function activated,
ͻ LJŽƵƌĐĂďůĞĐŽŵƉĂŶLJƐ,WƐĞƌǀĞƌƉƌŽvides one IP address for your gateway,
ͻ ĂŶĚLJŽƵƌŐĂƚĞǁĂLJƐ,WƐĞƌǀĞƌƉƌŽǀŝĚĞƐ/WĂĚĚƌĞƐƐĞƐ to your PCs. A DHCP server leases an IP
address with an expiration time that can be configured.
DHCP Server: Select "Yes" or "No" to enable or disable a simple DHCP server for LAN.
Number of CPEs: Configure the how many client device can be connected to the Gateway.
Lease Time: Configure the IP address lease time with "Lease time" for DHCP server. Default value is
3600 seconds.
DHCP Clients: Displays the PC(clients) connected and the related DHCP lease information.
Force Available: You can force the DHCP server to release one of the specific IP address as available and
a new client is possible to get that IP address, assigned by DHCP server. You need to select and then
press "Force Available".
Fig. 9: DHCP Settings