User's Manual

Chapter 3: Connections and setup

Illustrations contained in this document are for representation only.

Wireless Web Page Group

Radio

To set the basic configuration for the wireless features, click RADIO from the Wireless menu. These must

match the settings you make on your wireless-equipped PC on the LAN side.

Fig. 24: Radio configuration

Wireless Interface:

Choose the wireless interface on the EMTA.

Wireless:

Enable or disable the wireless function.

Country:

Display the country code you currently use.

Output Power:

Choose output power of the device.

802.11 Band:

Choose 2.4 GHz for 802.11 b/g/n, 5 GHz for 802.11a

802.11 N Support Required:

Enable 802.11n support under 802.11 band 2.4 GHz.