User's Manual

Chapter 1: Introduction

Illustrations contained in this document are for representation only.

Chapter 1: Introduction

EMTA Features

z Full Band Capture Front End.

z Increases performance with 50% increase in CPU speed.

z Adds Applications CPU to run Linux applications.

z Supports DBDC (Dual Band Dual Concurrent).

z Lowers Power with Advanced Power Management.

z Advanced Processor architecture.

z High-Speed Memory architecture.

z DOCSIS 1.0/1.1/2.0/3.0 Standard Compliant.

z PacketCable 1.0/1.5 NCS Standard Compliant

z Support Multiple Provisioning Mode.

z 4 ports Standard RJ-45 connector for 10/100/1000BaseT Ethernet with auto-negotiation and MDIX

functions; Support maximum Ethernet cable(Category 5e) length up to 100m.

z 2 ports RJ-11 Foreign Exchange Station (FXS) port for IP telephony; Support a maximum line length

between themselves and an end-receiver (handset, etc.) of up to 500 feet.

z Support simultaneous voice and data communications.

z Echo Cancellation.

z Voice Active Detection (VAD).

z DTMF detection and generation.

z Comfort Noise Generation (CNG).

z Support V.90 fax and modem services.

z 56 bits DES and 128 bits AES data encryption security.

z SNMP network management support.

802.11a/b/g/n supported, 20/40MHz bandwidth, supports 2 × 2 antennas for data rates up to

600Mbps.

z Fully IEEE 802.11a/b/g/n legacy compatibility with enhanced performance.

z Support Web pages and private DHCP server for status monitoring.

z The NTP (Network Termination Point) should be able to operate with an Loading of at least 5 REN.

z WƌŽƉĂŶĞΡƚĞĐŚŶŽůŽŐǇƐƵƉƉŽƌƚĞĚĞŶĂďůŝŶŐƚŚĞĐŽŶŶĞĐƚŝŽŶŽĨŵŽƌĞ/ŶƚĞƌŶĞƚƵƐĞƌƐǁŝƚŚŽƵƚĂĚĚŝƚŝŽŶĂů

network bandwidth.