User's Manual

Chapter 3: Connections and setup
38
Illustrations contained in this document are for representation only.
Keys will not be shown on this page. If selected, the data is encrypted using the key before being
transmitted.
Shared Key Authentication:
Decide whether to set the shared key Optional or Required by selecting from the drop-down
menu.
Network Key 1 to 4:
This allows you to enter four sets of the WEP key. For 64-bit WEP mode, the key length is 5
characters or 10 hexadecimal digits. As for 128-bit WEP mode, the key length is 13 characters or
26 hexadecimal digits
Current Network Key:
Select one set of the network key (from 1 to 4) as the default one
Passphrase:
You can enter ASCII codes into this field. The range is from 8 characters to 64 characters. For
ASCII characters, you can key in 63 characters in this field. If you want to key in 64 characters,
only hexadecimal characters can be used
Generate WEP Keys:
Click this button to generate the Passphrase