User's Manual

Chapter 3: Connections and setup

Illustrations contained in this document are for representation only.

Multicast Set:

For users, in order to connect to the AP, set the baseline level to deliver. Lower multicast rates

mean weaker, farther signals are allowed to connection. Higher multicast rates mean that only

close, strong signals are allowed.

NPHY Rate:

Set Physical Layer rate, only applicable when the 802.11n-mode set as auto.

Legacy Rate:

When AP released to share the band with existing legacy device, 802.11g/b/a devices. It

provided ways of ensuring coexistence between legacy and successor devices.

Beacon Interval:

This is the time interval between beacon transmissions. The measure unit is "time units" (TU) of

1024 microseconds. (Value range: 1~65535)

DTIM (Delivery Traffic Indication Message) Interval:

The value set here which informs the clients about the presence of buffered multicast/broadcast

data on the AP. It define CM will be delivered and how often that delivery occurs. (Value range:

1~255)

Fragmentation Threshold:

This option division of the MTU (Maximum transmission unit), default is 2346.

RTS (Request to Send) Threshold:

Sending RTS frames does not occur unless the packet size exceeds this threshold, default is 2347.