User's Manual

Chapter 3: Connections and setup

Illustrations contained in this document are for representation only.

WDS

This page allows configuration of WDS (Wireless Distribution System) features.

Fig. 29: WDS configuration

TCG220 can allow to communicate with other "extender" wireless access points either exclusively or

mixed with communications to local PCs. Use this page to designate the remote devices, the gateway is

allowed to communicate with, and to select the WDS mode. You will need to configure the same SSID,

WiFi encryption mode and also the pass phrases for both TCG220 and remote WiFi gateway before you

can extend the WiFi network together.

WDS:

Choose Disabled to shut down this function; select Enabled to turn on the function of WDS.

Remote APs:

Enter the MAC Addresses of the remote devices to relay the signals for each other.

Apply:

After proper configuration, click Apply to invoke the settings.