User Manual

3. Installing the Driver and CF Card

6. Click Finish to complete the installation.

Step 3: Disconnect the Pocket PC from the host computer.

Since the synchronization between the host computer and the Pocket PC has been completed, you may now

disconnect your Pocket PC from the host computer.

Step 4: Insert the Wireless CF Card.

At the last stage, insert the Wireless CF Card into the Type II CompactFlash slot in your Pocket PC with the printed

label facing up. If the card is securely inserted, the red LED should blink to indicate the wireless connection.

Then you should be able to find the wireless icon in the system tray:

Now you are done with the installation procedure. Proceed to next chapter to configure or fine-tune your Wireless

CF Card settings.

Note: If you need to set up the TCP/IP of your Wireless CF Card, refer to “Setting Up TCP/IP” for details.