User Manual

Wireless CF Card User Manual
12
3. Enter these fields and then tap Next.
 Profile Name: Enter a unique name to identify this configuration. A maximum of 32 characters is
allowed.
 Network Type: Select Peer-to-Peer Group.
4. In the Network Name field, enter a network name with a maximum limit of 32 characters. It is the name of the
wireless group you want to participate in. The network name for all stations in a single Peer-to-Peer Group
must be the same.
From the Channel Number list, select the channel to be used. In a Peer-to-Peer Group, all the wireless clients
use the same channel for communication. If your Pocket PC is the first station to start the workgroup, it will use
the channel selected in the active profile.
Note that the available channels are different according to your geographic location. Make sure to select the
legal frequency channels allowed in your regulatory domain.
1-11 channels for US, Canada (FCC)
1-14 channels for Japan (TELEC)
1-13 channels for Europe (ETSI)
10-13 channels for France
5. If your are going to set security, check the Enable Data Security checkbox and choose to use Alphanumeric
characters or Hexadecimal digits format to enter your WEP key. Then enter your WEP key in the provided field.
When using Hexadecimal format, only digits 0-9 and letters a-f, A-F are allowed. Make sure to enter the
character matching the required key format and length as below:
ASCII characters Hexadecimal digits
40 bit 5 alphanumeric characters 10 hexadecimal digits
104 bit 13 alphanumeric characters 26 hexadecimal digits