User Manual

Wireless CF Card User Manual
16
3. Enter these fields and then tap Next.
 Profile Name: Enter a unique name to identify this configuration. A maximum of 32 characters is
allowed.
 Network Type: Select Access Point.
4. In the Network Name field, enter a network name with a maximum limit of 32 characters. It is the name of the
Infrastructure network you want to participate in. The network name for all stations in a single Infrastructure
network must be the same.
Connecting to “Open” Access Point
If this field is filled in with the special SSID name “any”, your Wireless CF Card will connect to the first
compatible and “open” AP with the best signal strength within the connection range. It allows your Wireless CF
Card to wander across networks with different SSID.
Taping the Scan button will pop up a separate window to display the available “open” networks in the air. You
can quickly retrieve the desired network name by tapping on the network you want to connect to.
Connecting to a “Closed” Access Point