User's Manual

ManualsBrandsAskey Computer ManualsElectronicsWireless LAN module

WLU5054(RoHS) H/W SPECIFICATIONS

Host Interfaces USB 2.0 compliant

Form factor USB module

Chipset Broadcom BCM43236B

Operation Voltage 5V+/-10%

Network Standards IEEE 802.11a/b/g/n

Modulation Techniques DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM, MIMO

Data Rate and features

Data rates of up to 54 Mbps for 802.11a/g and 144.4 for 802.11n HT20, 300 Mbps for

HT40

Network Architectures Infrastructure

Operating Frequencies

EEE 802.11b/g/n: 2412 GHz ~ 2462 GHz

EEE 802.11a/n: 5180 - 5825GHz

Operating Channels

802.11b: 11ch for North America, 13ch for Europe (ETSI),13ch for Japan(ch14 for

Japan is optional)

802.11g: 11ch for North America, 13ch for Europe (ETSI)

802.11n: 3ch ~ 9ch ( HT40 ) for North America, 3ch ~11ch ( HT40 ) for Europe

(ETSI) and Japan

802.11a/n: 5.180G~5.850G

RF Output Power

2.4G:

802.11b: 22~23 dBm, output power

802.11g: 25~26 dBm, output power

802.11n:(HT20/HT40) : 25~29dBm

5G:

802.11a: 22~24dBm, output power

802.11n:(HT20/HT40) : 25~26dBm

UNII Band:

IEEE 802.11a CH36 - CH48 CH52 - CH64 CH100 – CH140

16~19dBm

IEEE802.11an HT20 CH36 - CH48 CH52 - CH64 CH100 – CH140

16~19dBm

IEEE802.11anHT40 CH38 - CH46 CH54 - CH62 CH102 – CH134

16~19dBm

Receiver sensitivity

(PER <10%)

Summary of content (5 pages)

PAGE 1
WLU5054(RoHS) H/W SPECIFICATIONS Host Interfaces USB 2.0 compliant Form factor USB module Chipset Broadcom BCM43236B Operation Voltage 5V+/-10% Network Standards IEEE 802.11a/b/g/n Modulation Techniques DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM, MIMO Data Rate and features Data rates of up to 54 Mbps for 802.11a/g and 144.4 for 802.11n HT20, 300 Mbps for HT40 Network Architectures Infrastructure Operating Frequencies EEE 802.11b/g/n: 2412 GHz ~ 2462 GHz EEE 802.
PAGE 2
Legacy 6Mbps: -82dBm MCS 7 HT20: < -64dBm, MCS15 HT20: < -64dBm MCS 7 HT40: < -61dBm, MCS15 HT40: < -61dBm Antenna Type Printing Antenna RoHS compliant Yes Security Security support for WPS, WPA2, WPA, WAP and protected management frames Software Support WinXP, Win7 Temperatures Operates from 0 to 60 degree C Humidity (non-condensing) 15 to 95% non-condensing SETUP WLAN MODULE CONNECTION 1.
PAGE 3
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
PAGE 4
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
PAGE 5
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.