Product Description

OEM Integration Instructions：
This device is intended only for OEM integrators under the following conditions：
The module can be used to installation in another host. The antenna must be installed
such that 20 cm is maintained between the antenna and users, and the transmitter
module may not be co-located with any other transmit or antenna. The module shall
be only used with the integral antenna(s) that has been originally tested and certified
with this module. As long as 3 conditions above are met, further transmitter test will
not be required. However, the OEM integrator is still responsible for testing their
end-product for any additional compliance requirement with this module installed (for
example, digital device emission, PC peripheral requirements, etc.)
IMPORTANT NOTE：
In the event that these conditions cannot be met (for example certain laptop
configuration or co-location with another transmitter), then the FCC authorization for
this module in combination with the host equipment is no longer considered valid and
the FCC ID of the module cannot be used on the final product. In these and
circumstance, the OEM integrator will be responsible for re-evaluating. The end
product (including the transmitter) and obtaining a separate FCC authorization. The
final end product must be labeled in a visible area with the following: “Contains
Transmitter Module FCC ID: H8N-ASK8822 or Contains FCC ID: H8N-ASK8822”.
Antenna Specification:
Antenna Type
Frequency
Band
(GHz)
T
X
Paths
Per Chain Max
Antenna Gain (dBi)
Directional Gain
(dBi)
Ant 0
Ant 1
For Power
For PSD
Wi-Fi Internal Antenna
PIFA
2412 ~
2462
2
2.40
1.98
2.40
5.41
5150 ~
5825
2
4.34
3.14
4.34
7.35
Bluetooth Internal Antenna
PIFA
2402 ~
2480
1
1.98
--