Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfil your needs for many years to come. Scandinavian design combines clean lines, everyday functionality and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world. To get the most out of your new machine, we recommend that you read the operating instructions before using the machine.
CONTENTS BEFORE USING YOUR MACHINE FOR THE FIRST TIME Language selection 3 Laundry labels 3 SAFETY INSTRUCTIONS 4 Grounding instructions 4 Installation 5 Transport/Winter storage 5 Packing material 5 Recycling 5 KidSafe™ Child-safe 5 KidSafe™ Child-safe start 5 Activating/deactivating KidSafe™ Child-safe start 5 To deactivate KidSafe™ Child-safe start temporarily 5 DESCRIPTION OF THE TUMBLE DRYER 6 ADVICE AND TIPS BEFORE YOU TUMBLE-DRY 7 CARE AND CLEANING 13 Cleaning the lint f
BEFORE USING YOUR MACHINE FOR THE FIRST TIME LANGUAGE SELECTION You will be prompted to select the display language when you have connected your machine and start it for the first time. Do as follows: 1. Turn the programme selector to choose from: US English, English, Svenska, Dansk, Norsk, Suomi, Français, Deutsch, Italiano, Espanol, Русский, Nederlands. 2. Press Stop to save the setting. LAUNDRY LABELS Certain materials are not suitable for tumbledrying.
SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WARNING! WARNING - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: • Read all instructions before using the appliance.
SAFETY INSTRUCTIONS INSTALLATION KIDSAFE™ CHILD-SAFE See the section Installation. WARNING! WARNING! Do not start the machine until it has been in position for 24 hours. If for some reason the tumble dryer needs to be laid down for transport or service, it must be laid on its left side viewed from the front. TRANSPORT/WINTER STORAGE If you need to move your machine or store it over the winter in unheated premises, make sure that you drain the condensed water container beforehand.
DESCRIPTION OF THE TUMBLE DRYER 1 2 3 4 7 1. Main power switch 5. Lint filter 2. Condensed water container 6. Outer door 3. Panel 7. Heat pump 4. Type plate 6 Customer Care Center, 1-800-898-1879, www.askousa.
ADVICE AND TIPS BEFORE YOU TUMBLE-DRY Here are some tips that may help you before you begin tumble-drying. HAVE THE CLOTHES BEEN SPUN? Items to be tumble-dried should be spun at 1000 rpm or faster. Higher spin speeds save energy and reduce drying time. MATERIALS THAT CAN BE TUMBLEDRIED This symbol means that the material is suitable for tumble- drying. Fabrics best suited to tumble-drying are cotton fabrics, terry cloth and synthetic fibres.
TUMBLE DRYING Below are step-by-step instructions to help you achieve the best possible tumble-drying results. Press the main power switch until the display lights. Open the door, load the items and then close the door. NOTE! SORT YOUR FABRICS You will achieve the most uniform drying results if the items are made of the same type of material. Do up zips and buttons, fasten belts, sort the items and adjust the load and temperature. Make sure that objects e.g.
TUMBLE DRYING NOTE! When using the Timed dry program with a program time that is too long, the garments can become “overdry”. This can cause items to shrink or crease and feel rough to the touch. Synthetic materials can also become charged with static electricity. Revitalise Use the Air fluff program when you just want to refresh, air or soften up items. Select the program time by pressing the + and - buttons.
TUMBLE DRYING DRYING PROGRAMME FINISHED The text Done appears on the display when the programme is finished. If the Anti crease option has been selected, the drum will rotate for three seconds per minute for two hours after the programme is finished. The compressor’s cooling fan continues to run after the program fi nishes, but stops automatically or when any button/knob is activated.
TUMBLE DRYING PROGRAMME CHART Here we present the energy and time consumption of a few different programmes. The table shows the effect of using different spin speeds when washing the load. Consumption can vary depending on room temperature, humidity, load, variations in the power supply and selected options.
SETTINGS YOU CAN CARRY OUT THE FOLLOWING SETTINGS • Language • KidSafe™ Child-safe You will be prompted to select the display language when you have connected your machine and start it for the first time. LANGUAGE Do as follows: 1. Turn off the machine using the main power switch. 2. Press and hold the Start button and then press the main power switch. 3.
CARE AND CLEANING CLEANING THE LINT FILTER The lint filter must be cleaned after each load. EMPTYING THE CONDENSED WATER CONTAINER 1. Lift the filter from the holder in the door. 2. Open the lint filter. Use you thumb to press on the edge as illustrated and pull it out. If you have not connected the machine to a separate drain the condensed water container must be emptied after each load. Remove the condensed water container, empty out the water and replace the container.
CARE AND CLEANING CLEANING THE EVAPORATOR FILTER AND EVAPORATOR Clean the evaporator and the evaporator filter at the intervals shown on the machine’s display or more often. A B 1. Turn off the Main power switch and open the outer door. 2. Remove the plinth. RECOMMENDATION! Wash the sponge filter in the washing machine after 30 drying cycles (use the rinse or quick wash program). 6. Clean the heat pump ribs by spraying water on them (use a plant sprayer).
CARE AND CLEANING CLEANING THE AUTO FILTER Clean the filter at the intervals shown on the machine’s display or more often 1. Pull the condensed water container out and up. 2. Unscrew and remove the auto filter. CLEANING THE OUTSIDE OF THE MACHINE Clean the outside of the machine and the programme panel with a mild cleaner. Do not use solvents, as these can damage the machine. Do not hose down or spray the machine with water. NOTE! Sealing Do not allow dust to accumulate around the machine.
TROUBLESHOOTING NOTE! When starting the tumble dryer for the first time or after a long period without use, you may notice a slight thumping noise. This noise is completely normal and will disappear after a few loads. THE MACHINE WILL NOT START Check: • that the door is properly closed. • that the main power switch is on. • that the Delayed Start option has not been selected. To cancel Delayed Start, press the Stop button for three seconds. • that the plug is connected.
TECHNICAL INFORMATION TECHNICAL DATA Height: 33 1/2” (850 mm) Width: 23 1/2” (595 mm) Depth: 29 1/3” (745 mm) Weight (net): 114 lb (52 kg) Cylinder volume: 38,3gal (145 l) Max. drying capacity: 24 lb (11 kg) Speed: 50-55 rpm Rated power: See type plate. Drum material: Stainless steel Outer casing material: Powder-coated and hot-galvanized sheet steel or stainless steel Setup: Stacking or freestanding STANDARD TESTS Europe: Drying performance: EN 611 21 (392/2012).
TECHNICAL INFORMATION INFORMATION ON ENERGY LABELLING Information sheet, in compliance with Commission Delegated Regulation (EU) No. 392/2012 ASKO Model designation T884HP XL Energy efficiency class A++ Max.
SERVICE AND GUARANTEE LIMITED WARRANTY – RESIDENTIAL APPLIANCES ASKO Distribution North America, LLC. (“ASKO”) warrants to the original purchaser (the “ASKO Customer”) of the ASKO product (the “ASKO Product”), who purchased the ASKO Product from a distributor, dealer, manufacturer’s representative or other seller who has been authorized by ASKO, that this ASKO Product is free of defects in materials and/or workmanship, subject to the terms and conditions set forth herein.
SERVICE AND GUARANTEE DISCLAIMER YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. EXPRESSLY DISCLAIMED ARE ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow exclusion or limitations regarding warranty rights. This Limited Warranty gives you specific legal rights and you may have other rights that vary from jurisdiction to jurisdiction.
INSTALLATION Freestanding WARNING! Do not start the machine until it has been in position for 24 hours. If for some reason the tumble dryer needs to be laid down for transport or service, it must be laid on its left side viewed from the front. WARNING! Risk of fire. Install the clothes dryer according to the manufacturer’s instructions and local codes. Do not install a clothes dryer with flexible plastic venting materials.
INSTALLATION 4. Place the two rubber feet on the front feet of the dryer. ADJUSTING THE FEET Screw the feet in or out so that the tumble dryer is steady and balanced on the floor or on the washing machine. 5. Fasten or undo the rear feet of the appliance until it is fully level, either on the floor or on the washing machine. 6. Slide the dryer backward until it reaches the antitipping bracket. Make sure the front of the appliance is raised by 50 to 150 mm as you slide it back.
INSTALLATION BUILT-IN NOTE! The dryer should not be installed next to a refrigeration appliance. The warm air expelled from the rear of the dryer would increase the temperature around the refrigeration appliance heat exchanger causing the compressor to run continuously. If it is not possible to install the dryer anywhere else, then the refrigeration appliance must be sealed off from the dryer.
INSTALLATION CONDENSED WATER The machine is supplied as shown in Option 1 (inset). This means that the condensed water is pumped into the condensed water container. This must then be removed and emptied by hand. Option 2 allows you to remove the small short hose from the nipple. Attach the rubber hose supplied to the same nipple. The water can then be pumped out into a sink or a fl oor drain (2a).
INSTALLATION Electrical Connections! Connecting a 3-wire Power Cord WARNING ! Read the Electrical requirements and grounding instructions before connecting the tumble dryer. WARNING ! Before starting this procedure, be sure the power is turned off at the breaker/fuse box. Electric models of the dryer are manufactured for a 3-wire connection system. The dryer frame is grounded by a link to the neutral conductor on the dryer terminal block.
INSTALLATION Connecting a 4-wire Power Cord 7. Connect neutral (white) wire of cord under center screw of terminal block. WARNING ! Before starting this procedure, be sure the power is turned off at the breaker/fuse box. 8. Connect the other wires to outer screws. 9. Tighten the strain relief screws. 10. Replace terminal box cover on back of dryer. 11. Plug dryer into wall receptacle. 12. Turn power on at breaker/fuse box.
DOOR HANGING 1 6 2 3 4 5 1. Hinge pins (top and bottom) 4. Locking hook 2. Cover plate 5. Hinges (left + right side) 3. Plastic plugs (on the upper and lower edges) 6. Plinth Customer Care Center, 1-800-898-1879, www.askousa.
DOOR HANGING You can choose whether the door is hung on the right or the left. Follow these instructions: 1. Remove the plinth. 2. Remove the hinge, two screws 3. Lift the door up and remove it. Support the door at the same time. 4. Remove both door pins (top and bottom). Fit them on the other side of the machine. Refit the hinge. 5. Loosen and remove the catch (lift up and pull out) and the cover plate on the door and the machine. Switch the catch and the cover plate. 1 2 6.
NOTES Customer Care Center, 1-800-898-1879, www.askousa.
NOTES 30 Customer Care Center, 1-800-898-1879, www.askousa.
NOTES Customer Care Center, 1-800-898-1879, www.askousa.
QUICK GUIDE 1. TURN ON THE MAIN POWER SWITCH 2. SELECT A PROGRAMME AND ANY OPTIONS 3. PRESS THE START BUTTON 4. DRYING PROGRAMME FINISHED Load the garments and close the door. Turn the programme selector to the required programme. The text End appears on the display when the programme is finished. Clean the lint filter after each load. Turn off the main power switch. Close the door. We reserve the right to make changes. www.askousa.com TD80.
