Operation Manual

27
Problems
Possible causes Action
1 minute appears in the
display
Water remains in the
machine.
Bad odour in the machine
The dishes are not
sufficiently dry
The program is taking longer
than estimated.
• Obstruction in the drain
hose.
• Kinks in the drain hose.
• The filters are clogged.
• Items in the drain pump.
• Dirt along the strips and in
corners
• Low-temperature
programs have been
selected for a prolonged
period.
• Drying power too low.
The machine is not fully
loaded.
• The rinse aid has run out
or the set dose is too low.
No action; next time the
program is run the corrected
time will be displayed.
• Disconnect the drain hose
where it is connected to the
sink’s water trap. Check that
no debris has become stuck.
Is the cone-shaped part of
the pipe cut so that the
diameter is at least 16 mm?
• Check that the hose is free
from kinks or sharp bends.
• Clean out the coarse filter,
the fine filter and the filter.
• Clean out the drain pump.
See chapter on cleaning
• Clean with a dish brush
and low-lather detergent.
• Run a Normal Temperature
program around once a
month.
• Activate the Normal drying
option (not all models).
Put a full load in the
machine.
• Replenish rinse aid or
increase the dose of rinse
aid.
• Open the door slightly once
the program has finished.