User Guide

Quick Start Guide

We know you’re excited about owning an ASKO dishwasher and you’re anxious to get started, so here’s a brief summary of the operation

procedures. The page references in this guide refer to the Use and Care Guide. To get the most out of the features of your new

dishwasher, we recommend that you read the Use and Care Guide.

Model D1776

SUPER CLEANING SYSTEM

Touchpad Controls

Press one of these touchpads to select a program or option.

Indicator Lights

These lights glow red to

indicate which program you

have selected.

LED Window

The LED window displays water temperature,

program run time and fault codes.

UNDERSTANDING THE INDICATOR LIGHTSUNDERSTANDING THE INDICATOR LIGHTS

When the dishwasher has finished, all of the indicator lights will come on. The lights will remain on until you open the door.

If the lights flash in an alternating pattern after you have started a program, this usually means the dishwasher door is not closed

securely. Push the door closed until you hear it click shut.

If all of the lights on the control panel flash in sequence, this means the machine has detected an overfill. (See page 7.) Should this

happen, call the ASKO Advisory Center.

This touchpad activates the heating element during the drying cycle to speed up the drying process.

Heat dryHeat dry

PROGRAMSPROGRAMS

Your ASKO dishwasher has three wash programs, a rinse and hold option and a heat fan dry option. Press the touchpad to select the

desired program and option.

Pots and pans

For the heaviest soiled loads, such as pots, pans,

casseroles, etc.

Normal

For normal wash loads.

Rinse and hold

To rinse dishes that you plan to wash later that day.

Quick

For lightly soiled loads. Items such as fine china

and crystal can be washed in this program, but you

should turn the Heat dry off.

THE CONTROL PANELTHE CONTROL PANEL

Model D1776 has a touchpad control panel, as illustrated below. To select a wash program or the heat dry option, simply press the

appropriate touchpad. When you press a touchpad, a red indicator light at the upper left of the touchpad glows to show that you selected

that program.

CHANGING A PROGRAMCHANGING A PROGRAM

If you’ve started the dishwasher then decide to change the program or turn off the Heat dry option, simply press the original program

touchpad for three to five seconds to stop the dishwasher. You can then press the touchpad for the desired program.

PAGE 1
Model D1776 Quick Start Guide SUPER CLEANING SYSTEM We know you’re excited about owning an ASKO dishwasher and you’re anxious to get started, so here’s a brief summary of the operation procedures. The page references in this guide refer to the Use and Care Guide. To get the most out of the features of your new dishwasher, we recommend that you read the Use and Care Guide. THE CONTROL PANEL Model D1776 has a touchpad control panel, as illustrated below.
PAGE 2
QUICK START PROCEDURES Refer to this page in the Use & Care Guide. 1. Load the dishwasher. (There’s no need to pre-rinse. Simply scrape off large food particles before you load the dishware.) 2. After you’ve pushed the baskets back inside the unit, manually rotate the upper and lower spray arms to be sure they turn freely. Rearrange any item that blocks the wash arms. 3. Make sure there is rinse aid in the dispenser. Add rinse aid, if needed. 4.