Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfill your needs for many years to come. Scandinavian design combines clean lines, everyday functionality, and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world. To get the most out of your new dishwasher, we recommend that you read the operating instructions before using it.
Contents Front panel Important safety instructions Before washing for the first time Loading the dishwasher Using the dishwasher Settings 2 3 4 5 7 10 Care and maintenance instructions Troubleshooting Technical information Service Program chart 12 14 17 18 19 Front panel The panel is fitted with touch buttons with audible feedback (see the chapter Settings).
Important safety instructions SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WARNING! This manual does not cover all possible conditions and situations that may occur. Common sense and caution should always be used when installing, operating, and maintaining any appliance. • Read all instructions before using the dishwasher. • Dishwashers must be electrically grounded. Read the Installation Instructions for details. • Use the dishwasher only for its intended purpose.
Before washing for the first time Water supply The machine can be connected to either a hot (max. 160 °F, 70 °C) or cold water supply. We recommend a cold water supply. The water pressure should be 4.2-140 psi. See also the section Economic dishwashing in the chapter Loading the dishwasher. Refill rinse aid indicator When the rinse aid needs topping up, the above symbol lights on the display. NOTE! Program key Some dishwashers include program keys in different languages.
Loading the dishwasher Economic dishwashing Typical load for 10 place settings Run programs only with a full load Wait until the dishwasher is fully loaded before running a program, this way you save energy. Use the Rinse & Hold program to rinse the dishes if there are any unpleasant odors while you wait for the dishwasher to become fully loaded. Run programs at a lower temperature If the dishes are only lightly soiled, you can select a lower temperature with certain programs.
1 2 Forward mount for plate support Used for plates with a diameter greater than 9 3/4" (25 cm). 1 2 4 3 Lower basket Place plates, side plates, serving dishes, pots, and cutlery (in the cutlery basket) in the lower basket. Place pots and pans in the rear left of the lower basket to best utilize dishwashing performance from the rear spray nozzle (Power Zone™ Pot & Pans), which is intended for these types of dishes.
Using the dishwasher Add detergent Recommended detergent amounts based on water hardness Water hardness Detergent amounts Soft (0-3 grains per gallon) Prewash 1 teaspoon Main wash 1 to 1-1/2 tablespoons Medium (4-8 grains per gallon) Prewash 1 teaspoon Main wash 1 to 2 tablespoons Hard (9+ grains*) Prewash 1 teaspoon Main wash 2 to 3 tablespoons *12 grains and higher is extremely hard water.
You can vary the temperature as shown below: Quick This program is used for glasses and porcelain that is lightly soiled, such as coffee cups. Super Quick Short program lasting about 15 minutes with acceptable results for very lightly soiled dishes. Delicate If the dishes are only lightly soiled, you can select Delicate. This program is intended for glasses and porcelain that have just been used and as such do not require such a powerful program. This program can be used for fragile dishes.
NOTE! During the first run of each program, the remaining time displayed can be slightly misleading, as the dishwasher is estimating the time. When you run the program a second time, the dishwasher will calculate the remaining time based on the previous duration of the program. Stopping or changing a program If you want to change programs after starting the dishwasher, open the door then press and hold Start/Stop for three seconds. Add more detergent if the lid of the detergent dispenser has opened.
Settings Do as follows to open the settings menu: + 1. First, open the door. Turn off the dishwasher using the On/Left-on mode button (press and hold). Release the button. 2. Press and hold the On/Left-on mode button until the display lights up. 3. Within five seconds, press and hold the Program selector and the Long dry button. 4. Release the buttons when the display shows . TIP! Be sure to press right on the symbols, so as not to inadvertently activate any other button.
Button press Options (Off) Settings Description Operation volume This sound is used to confirm each button press. (Low) (High) Press Start/Stop to save the setting value and continue to the next setting. (Low) LCD contrast For adjusting the contrast of the display on the panel. (High) Press Start/Stop to save the setting value and continue to the next setting. (Off) Rinse aid Rinse aid dosage setting. (Low dosage) (High dosage) Press Start/Stop to exit the settings menu.
Care and maintenance instructions Coarse filter NOTE! The coarse filter traps larger food particles, which cannot get past the drain pump. Empty the coarse filter as necessary. The dishwasher must not be used without the filters in place! 1 Lift the coarse filter by the handle. Dishwashing results may be affected if the coarse filter is incorrectly fitted. 2 Empty the coarse filter. Remember to replace it! Drain pump The pump can be accessed from inside the dishwasher.
Door When cleaning the edge around the door, use only a slightly damp cloth (with a little cleaner if necessary). WARNING! Do not use a spray bottle or the like around the door lock. This is to ensure that water does not penetrate the door catch and come into contact with the electrical components. Upper spray arm The upper basket must be removed before the upper spray arm can be released. 1 Pull out the upper basket and turn the basket catch on each runner outward (see illustration).
Troubleshooting Display Type of fault Action Overfilling Call the Customer Care Center. Water outlet fault See "Water remains in the dishwasher above the filters" in the table below. Water inlet fault Check that the water supply valve is on. Inlet valve leakage Turn off the water supply valve and call the Customer Care Center. Turn off the machine with the On/Left-on mode button and then turn it on again to clear the error message from the display.
Problem Possible causes Action Rattling sound when dishwashing. The dishes are not correctly placed or the spray arms are not rotating. Check that the dishes are placed securely. Spin the spray arms to make sure they can rotate. The dishwasher does not start. The Start/Stop start button has been pressed Press and hold Start/Stop until the display for too short a time. (the door open symbol). This shows indicates that the dishwasher is ready to start. The door is not properly closed. Check.
Problem Possible causes The touch buttons do not react when pressed. You have pressed the touch buttons too soon Wait a moment then try again. after opening the door. Dirt on the touch buttons. Action Clean with a dry or slightly damp cloth. Open the door until the display lights up. If this symbol appears on the display, the door is not open enough. Child lock (button lock) activated. 16 Customer Care Center 1-800-898-1879 www.askona.com See the section Settings.
Technical information Technical data Height: 33-7/8" - 36" (860-914 mm) Width: 23-5/8" (600 mm) Depth: 22-7/8" (581 mm) Weight: 110 lb (50 kg) 1) Water pressure: 4.2–140 psi Electrical connection: See serial number tag and rating plate. Rated power: 1) See serial number tag and rating plate. Weight can vary due to different specifications. Customer Care Center 1-800-898-1879 www.askona.
Service LIMITED WARRANTY – RESIDENTIAL APPLIANCES ASKO Distribution North America, LLC. (hereinafter “ASKO”) warrants the original purchaser (the “ASKO Customer”) of the ASKO product (the “ASKO Product”), who purchased the appliance from a distributor, dealer, manufactures representative or other seller who has been authorized by ASKO (“Authorized ASKO Dealer”), that this ASKO Product is free of defects in material and workmanship, subject to the terms and conditions set forth herein.
1 0.01 0.9 0.9 3.2 2.7 2.7 3.5 4.7 3.7 5.2 The energy label performance figures are based on this program. 0:04 0.3 0.5 0.1 0.1 0.8 0.9 0.5 0.7 Connection to hot water, approx. 120 °F (50 °C). 0.01 0:40 2:20 0:15 0:20 1:40 2:10 2:00 3:10 4) 0:06 0.5 0.9 0.2 0.2 1.4 1.6 1.0 1.5 Connection to cold water, approx. 50 °F (10 °C).
Quick guide Load the baskets (see page 5) 1. Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off large food particles before loading the dishwasher. Check that the spray arms can rotate freely 2. Check also that the water supply valve is on. Add detergent (see page 7) 3. 4. The detergent compartment has one smaller compartment for the prewash and one for the main wash.