Use & Care Guide
Table Of Contents
- Front page
- Contents
- Your dishwasher
- Important safety instructions
- Before washing for the first time
- Greener dishwashing
- Loading the dishwasher
- Using the dishwasher
- Add detergent
- The main power switch
- Select program
- Select program mode
- Select option
- Starting the dishwasher
- Time remaining
- Status light™
- Stopping or changing a program
- If you want to load more dishes
- If the dishwasher is turned off due to a power failure
- Once the program has finished
- How to get the best drying results
- Unloading the dishwasher
- Program chart
- Settings
- Care and maintenance instructions
- Troubleshooting
- Installation instructions
- Service
- Technical information
ActionPossible causesProblem
Activate the Extra Dry option.Depending on the load, the pro-
gram's drying cycle may be in-
sufficient.
The dishes are not dry enough.
Fully load the dishwasher.The dishwasher is not fully load-
ed.
Top up with rinse aid or increase
the rinse aid dosage level. See
the chapter Settings.
Rinse aid needs topping up or
dosage is set too low.
Open the door a little once the
program has finished.
Table continued from last page
35
Troubleshooting