Use and Care Guide
Table Of Contents
- Front page
- Contents
- Display panel
- Important safety instructions
- Before washing for the first time
- Loading the dishwasher
- Using the dishwasher
- Add detergent
- The main power switch
- Select a program
- Select a program mode
- Select an Option
- Starting the dishwasher
- Time remaining
- Stopping or changing a program
- If you want to load more dishes
- If the dishwasher is turned off due to a power failure
- Once the program has finished
- How to get the best drying results
- Unloading the dishwasher
- Program chart
- Settings
- Care and maintenance instructions
- Troubleshooting
- Technical information
- Installation instructions
- Service
- Notes
- Quick guide
Quick start guide
Load the baskets
1.
(See page 5.)
Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off
large food particles before loading the dishwasher.
Check that the spray arms can rotate freely
2.
Check also that the water supply valve is on.
Don't forget! Empty the coarse filter and clean the fine filter when necessary. (See page 15.)
Add detergent
3.
The detergent compartment has a small compartment for prewash and a large compartment for
the main wash. (See page 9.)
Open the door and press the main power switch
4.
Check/Add rinse aid
5.
Top up rinse aid for optimal washing and drying results. (See page 4.)
Refill rinse aid indicator.
Select a program, program mode, and any options
6.
(See page 10.)
Press Start/Stop, close the door
START
STOP
7.
Press and hold Start/Stop until the display shows "Program started, close door in 4 sec". This
indicates that the dishwasher is ready to start. Close the door properly within four seconds, otherwise
the dishwasher will not start.
Item No.: 706077. Rev. 03. We reserve the right to make changes.
Customer Care Center: 1-800-898-1879 | www.askona.com
28
en (01-19)