User Manual

EN 42
Cleaning the Water Tank Filter
If the water tank filter is dirty, you can clean it under the tap.
1. Remove the suction tube with the filter.
2. Clean it out under the tap and put it back into position.
Ensure that the filter touches the base of the water tank.
Descaling
During the steam process, there can be an accumulation of mineral
deposit in the steam system. This needs to be removed from time
to time. You need to carry out this task when the ‘Appliance needs
descaling’ notification is shown. If the appliance is not descaled after
three notifications, the steam functions will no longer be available. Use
this function only when the oven has cooled down fully. The descaling
process comprises descaling and rinsing. Notifications with information
and requests for actions will be shown on the display during the process.
1. Pour water mixed with descaling agent into the water reservoir.
Consult the descaling agent instructions for the correct mixing ratio.
2. Open the ‘Settings’ menu
3. Select ‘Cooking settings’
4. Select ‘Steamer settings’
5. Select ‘Descaling’ to select the function.
6. Press the confirm key to start descaling.
Note
We advise using NOKALK/DLS for descaling. NOKALK/DLS is an
extremely efficient descaling agent based purely on natural, entirely
biodegradable ingredients. The solution is non-corrosive, not
aggressive and is environmentally-friendly. As well as an effective
descaling action, it also has a cleansing and anti-bacterial effect,
ensuring that the appliance’s internal components are preserved in an
optimum hygienic state. Therefore food’s good taste is preserved and
the appliance’s service life is extended.
CLEANING