User Manual

EN 31
USE
Culisensor
If the culisensor is plugged in, the culisensor screen will be shown and
a small culisensor icon will appear next to the time. The oven operates
until the food core reaches the set temperature. The core temperature
is measured by means of the temperature probe.
1. Remove the rubber cap from the socket (right upper corner of the
oven cavity).
2. Insert the culisensor plug into the socket and insert the culisensor
completely into the dish.
The display will show the culisensor screen and icon.
3. Set the function and temperature. Instead of the time, you need to
set the core temperature (between 30-100 °C).
4. Start the progress by pressing the confirm key.
• During cooking, the rising temperature of the core will be displayed
(the desired core temperature may be adjusted during the cooking
process).
• When the set core temperature is reached, the cooking process
will stop. An acoustic signal will sound, which you may turn off
by pressing any key. After one minute, the acoustic signal will be
switched off automatically. The current time appears on the display.
Always place the culisensor’s entire metal probe in the dish.
Caution! After cooking, place the rubber cap back on the
culisensor socket.
Only use the probe intended for use with your oven. Make sure the
probe does not touch the heating element during cooking. After
cooking, the probe will be very hot. Take care to prevent injury
(burns).