User Manual

EN 31
Note! Do not use the pyrolysis function to clean the oven space and
the baking tray simultaneously.
Cleaning the oven space
Remove all accessories and guide rails from the oven. Start the
pyrolysis function.
Start the pyrolysis function
1. Remove all accessories and guides from the oven. If the baking tray
also needs to be cleaned, first place the pyrolysis guide rails.
2. Select ‘Pyrolysis’ with the function knob.
3. Select the desired cleaning intensity:
▷ Low: approximately 3 hours
▷ Average: approximately 3,5 hours
▷ High: approximately 4 hours
Only the cleaning intensity can be selected. The time is fixed and
depends on the selected cleaning intensity.
4. Press on the confirm button to start pyrolysis clean.
• After a certain period the oven door will be locked automatically for
your own safety (once the temperature reaches 250 °C).
An unpleasant smell may be released from the oven during the
cleaning process.
• The oven door can be opened once the appliance has cooled down
(after the end of the pyrolysis cleaning).
• When the oven has cooled down, wipe with a damp cloth. Wipe the
oven door and the adjacent surfaces around the door seal. Do not
rub the seal.
Aqua clean
With aqua clean and a damp cloth, you can easily remove grease and
dirt from the oven walls.
Using aqua clean
Only use aqua clean when the oven has cooled down fully. It is more
difficult to remove dirt and grease if the oven is hot.
The program takes 30 minutes. Food remains on the enamel walls will
be sufficiently soaked after 30 minutes so that they can be removed
with a damp cloth.
CLEANING