INSTRUCTIONS FOR USE TD75.B2 Carefully read the instructions for use before using the dryer. Tumble dryer T208C.W.
Dear Customer, We thank you for purchasing this quality ASKO product. We hope it meets all your expectations. Scandinavian design combines pure lines, everyday functionality, and high quality. These are the key characteristics of all our products, and the reason why they are highly appreciated across the globe. We kindly recommend you to read these instructions before using the appliance for the first time. The instruction manual also includes information on how you can help protect the environment.
IMPORTANT SAFETY INSTRUCTIONS GENERAL SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE! WARNING - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. 2. WARNING - Only use the dryer to dry laundry that was washed with water. Do not dry any laundry that was washed or cleaned with flammable cleaners or substances (such as gasoline, trichloroethylene etc.
the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. 18. Electrical installation, if required, must be done by a licensed electrician. 19. Do not operate appliance while away from the home. 20. Do not heat dry items that have been dry-cleaned. 21. The dryer is made and marked to facilitate recycling. When it is no longer useful, contact your local refuse collection service for advice on how to properly dispose of the dryer for purposes of recycling. 22.
b) For a grounded, permanently connected appliance: GROUNDING INSTRUCTIONS This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance. This manual does not cover every possible condition and situation that may occur. Use common sense and caution when installing, operating, and maintaining any appliance.
DRYER DESCRIPTION 10 1 2 3 4 5 6 11 6 7 8 1. 2. 3. 4. 5. 6. Main switch (ON/OFF) Program selector knob Display unit Program selector buttons Button (start/pause/stop) Rating plate with information about the dryer (on the inside of the dryer door) 7. QR and AUID code (on the inside of the dryer door) 8. Dryer door 9. Net filter 10. Condensate tank (depending on the model) 11. Condenser unit 12. Air vents or opening 12 9 Customer Care Center, 1-800-898-1879, www.askousa.
BEFORE USING THE APPLIANCE FOR THE FIRST TIME PACKAGING Remove all packaging. Please sort the materials in compliance with local recommendations (see chapter "DISPOSAL"). CLEANING Disconnect the dryer from the power mains and open the door towards you. Clean the dryer drum with a damp cloth and a mild detergent. No program can be started while the door is open.
INSTALLATION AND CONNECTION DRYER PLACEMENT The dryer can be either free standing or installed onto a washing machine. The dryer emits heat. Therefore, do not place it in a very small room, as the drying process may be longer due to limited amount of available air. Free-standing appliance The dryer may be placed adjacent to a washing machine. If the friction between the dryer feet and the floor is not sufficient, the dryer may move during operation.
Stacking on top of a washing machine To stack the dryer on top of a washing machine, use the extra vacuum feet and the tipping guard (A+B), supplied in the cardboard box in the dryer drum. Tipping guard part B is designed to fit on ASKO washing machines and it may be hard or impossible to mount on appliances of other brands.
How to stack a dryer onto the washing machine (ASKO): There is a cardboard box in the dryer drum, containing the vacuum feet and the tipping guard. 1 A B The tipping guard consists of two metal parts (A + B). Use two screws to attach the A part to the back of the dryer. 1 2 Undo the screw on the back side of the washing machine. 3 Use the screw to attach the tipping guard (B part) to the back of the washing machine. 4 Level the washing machine so that it is stable. 1.
CHANGING THE DOOR OPENING DIRECTION To change the direction of door opening, proceed as follows. 1 Open the door fully. 2 Undo the screws and remove the door. 3 Use the screwdriver to remove the door lock cover and undo the screw on the door lock. 4 Push the door lock upwards and remove it. Move it to the other side and push it downwards. 5 Fasten the screw on the door lock. Replace the door lock cover. Customer Care Center, 1-800-898-1879, www.askousa.
Undo the door hinge assembly (left) and the door latch assembly (right), switch their positions, and replace the screws (door hinge assembly to the righthand side, door latch assembly to the left-hand side). 6 Use the screwdriver to remove the plastic part more easily. 7 Undo the door ring and remove it temporarily. Rotate the door glass cover by 90°so that the sign indicating the opening of the door is on the other side.
DRAINING THE CONDENSATE The moisture from the laundry is extracted in the condenser unit and accumulated in the condensate tank. Condensate tank has to be emptied regularly (see chapter "CLEANING AND MAINTENANCE"). Interruption of the drying cycle due to full condensate tank can be avoided by running the condensate discharge hose found at the back of the appliance directly into a drain. A B 2 Connect the supplied drain hose to the same attachment (A). C Run the condensate drain hose into a drain.
See the separate installation instructions included in the set of documents. CONNECTING TO THE POWER MAINS Connection upon delivery TYPE: TDXX.XXXXX Art.No.: XXXXXX/XX XXX V ~ After installation, the dryer should stand still for two hours before it is connected to the power mains. Connect the appliance to an earthed power outlet. After installation, the wall outlet should be freely accessible. The outlet should be fitted with an earth contact (in compliance with the relevant regulations).
TIPS BEFORE DRYING This chapter includes several tips on how to prepare the laundry from drying. LAUNDRY SORTING Sort the laundry according to: • type, • fabric thickness. For the most even drying, make sure the laundry is made of a similar material. CLOTHING 1. Close the buttons, zips, and hook-and-loop fasteners, so that they do not damage the fabric. 2. Turn the pockets inside out. 3. Place very sensitive clothes in a special-purpose laundry washing bag.
LAUNDRY SYMBOLS Observe the laundry symbols: Wash cycle Tumble dry cycle Normal wash cycle Machine dry Permanent Press or Wrinkle Resistant setting Normal setting Gentle/Delicate setting Permanent Press or Wrinkle Resistant setting Hand wash only Gentle or Delicate setting Do not wash Do not tumble dry Do not wring.
MATERIALS (FABRICS) SUITABLE FOR DRYING IN A TUMBLE DRYER Material is suitable for tumble drying. Clothes dried in a tumble dryer are softer and lighter than air-dried clothes. The dryer does not cause any considerable wear of the fabric. The lint collected in the lint filter consists of dust and fabric fragments collected during the use of the laundry. MATERIALS (FABRICS) THAT MAY NOT BE DRIED IN A TUMBLE DRYER This symbol means that the material is not suitable for drying in a tumble dryer.
DRYING PROCESS, STEP BY STEP (1 – 7) WARNING - To reduce the risk of electric shock or injury to persons, read the "IMPORTANT SAFETY INSTRUCTIONS" section, before operating this appliance. STEP 1: SORT THE FABRICS See chapter "TIPS BEFORE DRYING" STEP 2: TURN ON THE MAIN SWITCH. Turning on Press the on/off button. Turning off Press the on/off button. STEP 3: OPEN THE DRYER DOOR AND INSERT THE LAUNDRY. Open the dryer door towards you. 1 2 3 Place the laundry into the empty dryer drum.
STEP 4: CHOOSE THE DRYING PROGRAM. Choose the program by rotating the program selector knob in either direction. The program selector knob can be used when arrows appear on the display. Select the program based on the type and remaining moisture of the laundry you wish to dry. Anticipated program duration is indicated on the display. Extra program settings can also be selected for each program. See STEP 5. Choose between the following programs: Program Max. kg Description 1.
Program 10. SYSTEM SETTINGS Max. kg Description Use the program selector knob to select System Settings. Confirm the selection by pressing ENTER (button "2"). Then, use the program selector knob to scroll the list of settings. The following can be selected: The following options are available: – Child Lock, – Language (language selection), – Programs (set of programs), – Display (display unit: contrast & logo), – Sounds, – Reset. See chapter "SYSTEM SETTINGS".
STEP 5: CHOOSING THE PROGRAM SETTINGS Using the program settings, the drying programs can be further adjusted to your wishes. Some program settings may not be available for your selected program. Selected program settings will remain stored after the end of the drying cycle and may be changed subsequently (except for delayed start which is not stored after the drying is complete). 1 1. Dryness level (extra dry) 2. Anti-crease 3. Load 2 3 4 5 6 4. Lower drying temperature (gentle dry) 5.
5. Timed drying First, use the program selector knob to select the Timed Dry program. Press the button 5 to select a drying time from 30 minutes to 4 hours, in 15-minute steps. Use the button 6 (OK) to confirm the 2 Time OK 2:15 selected drying time. Press the Start/ Pause/Stop button to start the drying process. 5 6 6. Start delay Press the button 6 to choose the delayed start when you wish the drying program to start after a certain period of time.. Press the button 6 for to appear.
STEP 6: CLOSE THE DOOR AND START THE DRYING PROCESS. Close the dryer door and press the Start/Pause/Stop button. Start (pressed briefly – start/resume) Pause (pressed briefly – drying temporarily suspended) Stop (press and hold for 3 seconds – stop or cancel) Starting 2:20 Remaining time Depending on the selected program and load, anticipated drying time will be displayed in hours and minutes. Actual drying time will depend on the selected program, load, type of laundry, spinning rate etc.
STEP 7: END OF PROGRAM Cycle completed succsessfully Anti creasing After the end of the drying program, the display will indicate that the program has been successfully completed ("Cycle completed successfully"). Start new If you have selected the "anti-crease" option, the dryer will continue to operate after the end of the drying cycle for the amount of time specified upon selection of this program setting.
Favourite programs Cycle completed succsessfully Start new Add fav After the end of the drying program, you can use the button 6 to store the program, including all extra settings, as your favourite program. 6 Up to 4 favourite programs can be stored. Make your list of four own favourite programs. Fav. list position: 1. Favourite 2 Confirm Back Choose the favourite program position (number) using the button 2; the most recently used program, including all settings, will be offered.
SYSTEM SETTINGS In the main menu, use the program selector knob to select System Settings. Confirm the selection by pressing the button 2. Enter System settings 2 Then, use the program selector knob to scroll the list of settings that can be changed. • Child Lock • Language • Programs • Display (display unit: contrast & logo) • Sounds • Reset Use the button 6 (BACK) to return to System Settings or to the main menu. Press the INFO button to display brief information about the setting.
PROGRAMS The main menu includes the entire set of programs that you can choose using the program selector knob. This setting allows only displaying the selected program in the main menu. Press the button 1 for to appear. Use Programs Sports wear Info Back the program selector knob or the button 1 to select a program. Use the button 3 to set whether this program is to be displayed or not: 1 3 6 On / Off . Use the button 6 to return to System Settings.
RESET This means that all settings will return to the default settings and your own settings will be deleted. Confirm the selection by pressing the Reset Yes Info Back button 3 (YES). Press the button 6 to return to System Settings. 3 6 NOISES In the initial stage of drying or during drying, the compressor and the pump may cause noise which, however, does not affect the dryer operation. Humming noise: this is the sound of the compressor unit. The level of noise depends on the program and the drying stage.
CLEANING AND MAINTENANCE CLEANING THE NET FILTER IN THE DOOR 1 Open the filter housing. 2 Pull out the net filter. 3 Gently scrape the filter to remove the lint lining (fibres and threads). 4 Replace the net filter. 5 Close the filter housing. Make sure the net filter is correctly inserted into the filter housing. Clean the net filter after each drying cycle. The dryer may never operate without a net filter or if the net filter is damaged. Customer Care Center, 1-800-898-1879, www.askousa.
EMPTYING THE CONDENSATE TANK After each drying cycle, empty the condensate tank. If the condensate tank is overflowing the drying program will be paused automatically. A warning will appear on the display unit that the condensate tank has to be emptied. Pull out the condensate tank from the dryer, then turn it upside down over a washbasin, sink, or any suitably sized vessel. 1 2 Discharge the water through the condensate drain opening.
CLEANING OF WATER CONDENSER Clean the condenser when warning appears on the display. Before cleaning, make sure to switch off the appliance and disconnect it from the power mains (unplug the power cord from the outlet). During cleaning, some water may be spilled. It is therefore recommended to place an absorbent cloth on the floor. Open the outer cover. 1 Hold the levers on the inside cover and rotate them upwards. Remove the inside cover. 2 3 Rotate the condenser unit lever up.
5 Use a soft damp cloth to clean: – the area in front of the condenser unit where water usually accumulates, – the area behind the water condenser unit (reach deep into the opening all the way to the rear wall), – condenser unit housing, – all gaskets and sealing areas on the condenser unit housing and door. 6 Press on the edge of the filter and pull it out. 7 Rinse the filter under running water; then, dry it. 8 Replace the filter. 9 Replace the condenser unit into the housing.
ADDITIONAL INFORMATION REGARDING CLEANING If you have inadvertently removed the entire net filter housing in the dryer door, replace it in the same position. Opening on the lower side of the door should occasionally be cleaned with a vacuum cleaner. If necessary, clean the filter housing and door gasket as well. Customer Care Center, 1-800-898-1879, www.askousa.
CLEANING THE APPLIANCE EXTERIOR Wipe the dryer exterior using a soft damp cotton cloth and mild detergent. Do not use any cleaning agents that could damage the dryer (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents). Wipe all parts of the dryer with a soft cloth until dry. Keep the area around the dryer clean and cool. Dust, heat, and humidity will extend the drying time. Always disconnect the dryer from the power mains before cleaning.
ERRORS – WHAT TO DO? Disturbances from the environment (e.g. the power grid) may result in various error reports (see Troubleshooting table). In such case: • Switch off the appliance, wait for 1 minute, switch the appliance back on, and repeat the drying program. • If the error persists, call an authorized service unit. • You will be able to solve most of the problems in dryer operation by yourself (see troubleshooting table below). • Repairs may only be carried out by an adequately trained person.
Problem/error Cause What to do? Unevenly dried laundry. • Laundry of varying types and thickness, and excessive amount of laundry. • Make sure you have sorted the laundry by type and thickness, whether you have added a suitable amount of laundry to the drum, and whether you have selected a suitable program. A slight hitting noise appears. • If the dryer is out of use for a long period of time, the same points of load-bearing elements or components are under stress for a long time.
INFORMATION before, during, and after the program (depending on the model) Error indication on the display What to do? EN: STEAM TANK IS EMPTY. PLEASE FILL WATER Fill the steam generator tank with distilled water. Pour the water through the steam generator tank filter, located in the condenser unit tank housing. See chapter “BEFORE USING THE APPLIANCE FOR THE FIRST TIME«. EN: STEAM TANK FULL Call a service technician. EN: DOOR IS OPEN, PLEASE CLOSE THE DOOR Close the dryer door.
SERVICING LIMITED WARRANTY – RESIDENTIAL APPLIANCES ASKO Distribution North America, LLC. (“ASKO”) warrants to the original purchaser (the “ASKO Customer”) of the ASKO product (the “ASKO Product”), who purchased the ASKO Product from a distributor, dealer, manufacturer’s representative or other seller who has been authorized by ASKO, that this ASKO Product is free of defects in materials and/or workmanship, subject to the terms and conditions set forth herein.
DISCLAIMER YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. EXPRESSLY DISCLAIMED ARE ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow exclusion or limitations regarding warranty rights. This Limited Warranty gives you specific legal rights and you may have other rights that vary from jurisdiction to jurisdiction.
SERVICE AFTER EXPIRATION OF LIMITED WARRANTY For information about obtaining parts and labor after expiration of this Limited Warranty or arising outside the scope of this Limited Warranty, please contact ASKO Customer Care at 1-800-898-1879. After your purchase and prior to first use of the ASKO Product, register your ASKO Product with ASKO by utilizing the address information below.
TECHNICAL INFORMATION TECHNICAL INFORMATION Height 845 mm Width 595 mm Depth 640 mm Weight (net) 44 kg Drum volume 117 l Maximum drying load See rating plate Speed 50–55 rpm Rated power See rating plate Drum material Stainless steel Housing material Hot-dip galvanized and powder coated sheet metal, or stainless steel sheet Customer Care Center, 1-800-898-1879, www.askousa.
PROGRAM TABLE The following table lists the power consumption and duration for several programs. The table shows the effect on drying parameters at varying spinning speeds during the washing cycle. Actual consumption can vary depending on the room temperature, humidity, load, changes in power supply, and selected options. The following requirements apply to the consumption values specified below.
DISPOSAL Disposal / recycling of packaging Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indicates that the product should not be treated as normal household waste. The product should be taken to an authorized collection centre for waste electric and electronic equipment processing.
NOTES 44 Customer Care Center, 1-800-898-1879, www.askousa.
NOTES Customer Care Center, 1-800-898-1879, www.askousa.
NOTES 46 Customer Care Center, 1-800-898-1879, www.askousa.
QUICK GUIDE SORT THE FABRICS 1. Sort the fabric by type and by how heavily soiled the laundry is. Observe the drying symbols on the laundry labels. Close the zippers, hook-and-loop fasteners and buttons. SWITCH ON THE MAIN ON/OFF SWITCH (ON/OFF) 2. OPEN THE DRYER DOOR AND INSERT THE LAUNDRY. Before doing so, make sure the drum is empty. 3. CHOOSE THE DRYING PROGRAM. Turn the program selector knob to the desired drying program. 4. CHOOSE THE PROGRAM SETTINGS.
www.askousa.com TD75.