INSTRUCTIONS FOR USE TD85.21XX Carefully read the instructions for use before using the dryer. Tumble Dryer T611VU.W.
Dear Customer, We thank you for purchasing this quality ASKO product. We hope it meets all your expectations. Scandinavian design combines pure lines, everyday functionality, and high quality. These are the key characteristics of all our products, and the reason why they are highly appreciated across the globe. We kindly recommend that you read these instructions before using the appliance for the first time. The instruction manual also includes information on how you can help protect the environment.
IMPORTANT SAFETY INSTRUCTIONS GENERAL SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE! WARNING - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. 2. WARNING! - Only use the dryer to dry laundry that was washed with water. Do not dry any laundry that was washed or cleaned with flammable cleaners or substances (such as gasoline, trichloroethylene etc.
heat (cool down period). Avoid stopping a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. 18. Clothes dryer installation must be performed by a qualified installer. 19. Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers.
WARNING! - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance (Canadian market only). If it will not fit the outlet, have a proper outlet installed by a qualified electrician. Use copper conductors only, if the terminal is acceptable only for connection to copper.
KIDSAFE™ CHILD SAFETY • WARNING! - Do not allow the children to play with the dryer. • Prevent your children and pets from entering the dryer drum. • Before closing the dryer door and running the program, make sure there is nothing except laundry in the drum (e.g. if a child climbed into the dryer drum and closed the door from the inside). • Activate the child lock. See chapter "SETTINGS", section Child Lock.
DRYER DESCRIPTION 1 2 3 4 5 6 10 7 1. 2. 3. 4. 5. 6. Main switch (ON/OFF) Program selector knob Display unit Program selector buttons Button (start/pause) Rating plate with information about the dryer (on the inside of the dryer door) 7. QR and AUID code (on the inside of the dryer door) 8. Dryer door 9. Door net filter 10. Air exhaust hose opening 9 8 Customer Care Center, 1-800-898-1879, www.askona.
BEFORE USING THE APPLIANCE FOR THE FIRST TIME PACKAGING Remove all packaging. Please sort the materials in compliance with local recommendations (see chapter "DISPOSAL"). CLEANING Disconnect the dryer from the power mains and open the door towards you. Before using the dryer for the first time, clean the dryer drum using a soft damp cotton cloth and water No program can be started while the door is open.
INSTALLATION AND CONNECTION DRYER PLACEMENT The dryer can be either freestanding or installed on top of a washing machine. The dryer emits heat. Therefore, do not place it in a very small room, as the drying process may be longer due to limited amount of ambient air. Freestanding appliance The dryer may be placed adjacent to a washing machine. If the friction between the dryer feet and the floor is not sufficient, the dryer may move during operation.
Clearance around the dryer for optimum operation 100 mm (4") 50 mm (2") Stacking on top of a washing machine To stack the dryer on top of a washing machine, use the extra vacuum feet and the tipping guard (A+B), supplied in the cardboard box in the dryer drum. Tipping guard part B is designed to fit on ASKO washing machines and it may be hard or impossible to mount on appliances of other brands.
How to stack a dryer onto the washing machine (ASKO): There is a cardboard box in the dryer drum, containing the vacuum feet and the tipping guard. 1 A B The tipping guard consists of two metal parts (A + B). Use two screws to attach the A part to the back of the dryer. 2 Undo the screw on the back side of the washing machine. 3 Use the screw to attach the tipping guard (B part) to the back of the washing machine. 4 Level the washing machine so that it is stable. 1.
CHANGING THE DOOR OPENING DIRECTION To change the direction of door opening, proceed as follows. 12 1 Open the door fully. 2 Undo the screws and remove the door. 3 Use a screwdriver to remove the door lock cover and undo the screw on the door lock. 4 Push the door lock upwards and remove it. Move it to the other side and push it downwards. 5 Fasten the screw on the door lock. Replace the door lock cover. Customer Care Center, 1-800-898-1879, www.askona.
Undo the door hinge assembly (left) and the door latch assembly (right), switch their positions, and replace the screws (door hinge assembly to the righthand side, door latch assembly to the left-hand side). 6 Use a screwdriver to remove the plastic part more easily. 7 Undo the door ring and remove it temporarily. Rotate the door glass cover by 90° so that the sign indicating the opening of the door is on the other side.
AIR EXHAUST other fasteners that extend into the duct and catch lint. The tumble dryer must only be operated when it is correctly fitted with exhaust duct. Connecting the exhaust duct to the dryer You will need to purchase a UL-CSA-approved 4" ridged metal exhaust duct. The dryer is delivered with the stub pipe attached to the rear exhaust outlet, though the exhaust duct can be attached to either the left or the right exhaust outlet.
Connecting to a ventilation duct You will need a UL-CSA-approved, 4-inch ridged metal exhaust duct. If a flexible duct is used, it must comply with the Outline for Clothes Dryer Transition Duct. Subject 2158A and maximum length of 2.4 m (8 feet). The more bends and the longer the duct, the less air will circulate through the machine, which will impede drying performance. We recommend that you cut off any excess exhaust duct and run the duct with as few bends as possible.
See the separate installation instructions included in the set of documents. CONNECTING TO THE POWER MAINS Connection upon delivery TYPE: TDXX.XXXXX Art.No.: XXXXXX/XX XXX V ~ After installation, the dryer should stand still for two hours before it is connected to the power mains. Connect the appliance to a grounded power outlet. After installation, the wall outlet should be freely accessible. The outlet should be fitted with a ground contact (in compliance with the relevant regulations).
ASKO LAUNDRY CARE - HIDDEN HELPERS* Laundry care ironing board The ironing board is a clever solution. It is always handy when you need to iron your clothes, and it can be easily, safely and invisibly stored away when not in use. It can be installed between your washer and dryer, or on top of one of them. Laundry care double A wire basket and pull-out shelf. It can be used as an additional surface for folding clothes, sorting socks and for storage.
*AVAILABILITY DEPENDING ON MARKET 18 DENOMINATION ART. No. IRONING BOARD HI1153 White 576552 IRONING BOARD HI1153 Titanium 576553 LAUNDRY CARE DOUBLE HDB1153 White 576554 LAUNDRY CARE DOUBLE HDB1153 Titanium 576555 LAUNDRY CARE SINGLE HSS1053 White 576730 LAUNDRY CARE SINGLE HSS1053 Titanium 576732 LAUNDRY CARE HB1153 White 576733 Customer Care Center, 1-800-898-1879, www.askona.
TIPS BEFORE DRYING This chapter includes several tips on how to prepare the laundry for drying. LAUNDRY SORTING Sort the laundry according to: • type, • fabric thickness. For the most even drying, make sure the laundry is made of a similar material. CLOTHING 1. Close the buttons, zips, and hook-and-loop fasteners, so that they do not damage the fabric. 2. Turn the pockets inside out. 3. Place very sensitive clothes in a special-purpose laundry washing bag.
LAUNDRY SYMBOLS Observe the laundry symbols: Wash cycle Tumble dry cycle Normal wash cycle Machine dry Permanent Press or Wrinkle Resistant setting Normal setting Gentle/Delicate setting Permanent Press or Wrinkle Resistant setting Hand wash only Gentle or Delicate setting Do not wash Do not tumble dry Do not wring.
MATERIALS (FABRICS) SUITABLE FOR DRYING IN A TUMBLE DRYER Material is suitable for tumble drying. Clothes dried in a tumble dryer will be softer and lighter than air-dried clothes. The dryer does not cause any considerable wear of the fabric. The lint collected in the lint filter consists of dust and fabric fragments collected during the use of the laundry. MATERIALS (FABRICS) THAT MAY NOT BE DRIED IN A TUMBLE DRYER This symbol means that the material is not suitable for drying in a tumble dryer.
DRYING PROCESS WARNING! - To reduce the risk of electric shock or injury to persons, read the "IMPORTANT SAFETY INSTRUCTIONS" section before operating this appliance. STEP 1: SORT THE FABRICS. See chapter "TIPS BEFORE DRYING" STEP 2: TURN ON THE MAIN SWITCH. Turning on Press the on/off button. Turning off Press the on/off button. STEP 3: OPEN THE DRYER DOOR AND INSERT THE LAUNDRY. Open the dryer door towards you. 1 2 3 Place the laundry into the empty dryer drum.
STEP 4: CHOOSE THE DRYING PROGRAM. Choose the program by rotating the program selector knob in either direction. Confirm the program selection by pressing the button under the program. Select the program based on the type and remaining moisture of the laundry. Anticipated program duration is indicated on the display. Extra program settings can also be selected for each program. See STEP 5. Choose between the following programs: Program Max. kg* Description (lbs)* 1. AUTO EXTRA DRY 11 (24.
Program Max. kg* Description (lbs)* 10. SHIRTS 2 (4.4) Use this program to dry shirts and blouses. Adjusted drum rotation prevents the laundry from creasing. 11. SPORTS WEAR 3 (6.6) Use this program for clothing with a membrane, for sportswear made of mixed materials, and breathable fabrics. 12. CONDITIONING 2 (4.4) Use this program to thermally activate and improve the efficiency of the impregnation agent. 13. QUICK PRO 2 (4.
STEP 5: CHOOSING THE PROGRAM SETTINGS Using the program settings, the drying programs can be further adjusted to your preferences. Some program settings may not be available for your selected program. Selected program settings will remain stored after the end of the drying cycle and may be changed subsequently (except for delayed start which is not stored after the drying is complete). 1 1. Drying program 2. Dryness level (Extra dry) 3. Gentle dry (Gentle dry) 2 3 4 5 6 4. Load 5. Delay Start 6.
5. Delay Start Choose the delayed start when you wish the washing program to start after a certain period of time (30 minutes to 24 hours after you press the Start/Pause button). The estimated time remaining until the end of the drying program will be indicated above the "6" button. Use the program selector knob to set Set Delay start the delay from 30 minutes to 6 hours in 30-minute increments, and then from 6 30 min 1 h 1,5 h 2 h Off hours to 24 hours in 1-hour increments.
Favourite programs/Add to fav? Wash dried Good ECO performance Start new Auto extra Add to fav After the end of the drying program, you can use the button 6 to store the program, including all extra settings, as your favourite program. 6 Up to 6 favourite programs can be stored.
STEP 6: CLOSE THE DOOR AND START THE DRYING PROCESS. Close the dryer door and press the Start/Pause button.
Preparing for program canceling. Cooling down. Program canceled. Garments can still be hot. To stop and cancel the drying program, press the Start/Pause button and hold it for 3 seconds. The selected program will be stopped and the cooling stage will begin. Cooling time depends on the selected program. Only after the cooling is complete, you can use the program selector knob to select a new program and press the Start/Pause button.
STEP 7: END OF PROGRAM 00:00 Drying finished After the end of the drying program, the display will indicate that the drying has been finished ("Drying Finished"). Auto extra Drying finished Auto extra Anti crease Wash dried Good ECO performance Start new Auto extra Add to fav If you have selected the "anti-crease" option, the dryer will continue to operate after the end of the drying cycle for the amount of time specified upon selection of this program setting.
SETTINGS Program Sports wear Conditioning Quick pro Time program Airing Settings Settings In the main menu, use the program selector knob to select Settings. Confirm the selection by pressing the button 6. 6 Then, use the program selector knob to scroll the list of settings that can be changed.
SET LANGUAGE You can choose between 24 languages. Press the button . Use the program selector knob to scroll the list of languages. Confirm selection with button under chosen language. Set language to: GB English Use the button to return to Settings. SOUNDS SETTINGS You may choose the acoustic signal volume. Sound volume Use the program selector knob or buttons to choose the sound volume. During selection, the acoustic signal will be played with the currently highlighted volume.
CUSTOMIZE FAVORITES AND PROGRAMS The main menu includes the entire set of programs that you can choose using the program selector knob. This setting allows only displaying the selected program in the main menu. Use the program selector knob to select a program. Confirm your selection with the button under the selected program. Auto extra Auto Auto normal Auto iron Auto jeans Auto synth will appear next to the selected program.
CLEANING AND MAINTENANCE Before cleaning, make sure to switch off the appliance and disconnect it from the power mains (unplug the power cord from the outlet). CLEANING THE DOOR NET FILTER IN THE DOOR 1 Open the filter housing. 2 Pull out the net filter. 3 Gently scrape the filter to remove the lint lining (fibres and threads). 4 Reinstall the net filter. 5 Close the filter housing. Make sure the net filter is correctly inserted into the filter housing.
ADDITIONAL INFORMATION REGARDING CLEANING If you have inadvertently removed the entire net filter housing in the dryer door, reinstall it in the same position. Opening on the lower side of the door should occasionally be cleaned with a vacuum cleaner. If necessary, clean the filter housing and door gasket as well. Customer Care Center, 1-800-898-1879, www.askona.
CLEANING THE APPLIANCE EXTERIOR Clean the appliance exterior and the display unit using a soft damp cotton cloth and water. Do not use solvents or abrasive cleaners that could damage the appliance (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents). Wipe all parts of the dryer with a soft cloth until dry. Keep the area around the dryer clean and cool. Dust, heat, and humidity will extend the drying time.
ERRORS AND TROUBLESHOOTING Disturbances from the environment (e.g. the power grid) may result in various error reports (see Troubleshooting table). In such case: • Switch off the appliance, wait for 1 minute, switch the appliance back on, and repeat the drying program. • If the error persists, call an authorized service center. • You will be able to solve most of the problems in dryer operation by yourself (see troubleshooting table below). • Repairs may only be carried out by an adequately trained person.
Problem/error Cause What to do? Laundry not dried or drying takes too long. • Filters are not clean. • Clean the filters (see chapter "CLEANING AND MAINTENANCE"). • Dryer is placed in a closed room; room that is too cold; or room that is too small and the air overheats as a result. • Make sure there is adequate supply of fresh air to the dryer; for example, open the door and/or window. • Check if the temperature in the room where the dryer is installed is too high or too low.
FAILURE DISPLAY In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit. Press and hold the INFO button to Error display the error description. Error 3 Info Switch off the dryer and turn it back on. 5 Errors indicated on the display unit (depending on the model) may include the following: Problem/ error Error 0 Error indication on the display Error E0 – Please check user manuals or call service. Error 1 Error E1 - Thermistor fault.
INFORMATION before, during, and after the program (depending on the model) 40 Error indication on the display What to do? EN: Steam tank is empty. Please fill water. Fill the steam tank with distilled water or condensate. Pour the water through the steam tank filter located in the condensate tank housing. See chapter "BEFORE USING THE APPLIANCE FOR THE FIRST TIME". EN: Steam tank full. Stop adding condensate or distilled water. EN: Please close the door before pressing start.
SERVICE AND GUARANTEE LIMITED WARRANTY – RESIDENTIAL APPLIANCES ASKO Distribution North America, LLC. (“ASKO”) warrants to the original purchaser (the “ASKO Customer”) of the ASKO product (the “ASKO Product”), who purchased the ASKO Product from a distributor, dealer, manufacturer’s representative or other seller who has been authorized by ASKO, that this ASKO Product is free of defects in materials and/or workmanship, subject to the terms and conditions set forth herein.
DISCLAIMER YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. EXPRESSLY DISCLAIMED ARE ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow exclusion or limitations regarding warranty rights. This Limited Warranty gives you specific legal rights and you may have other rights that vary from jurisdiction to jurisdiction.
SERVICE AFTER EXPIRATION OF LIMITED WARRANTY For information about obtaining parts and labor after expiration of this Limited Warranty or arising outside the scope of this Limited Warranty, please contact ASKO Customer Care at 1-800-898-1879. After your purchase and prior to first use of the ASKO Product, register your ASKO Product with ASKO by utilizing the address information below.
TECHNICAL INFORMATION TECHNICAL INFORMATION 44 Height 845 mm (33 17/64") Width 597 mm (23 1/2") Depth 769 mm (30 9/32") Weight (net) 45 kg (99.2 lbs) Drum volume 145 l (5.12 cu.ft) Maximum drying load See rating plate Rated power See rating plate Drum material Stainless steel Housing material Hot-dip galvanized and powder coated sheet metal, or stainless steel sheet Placement/installation Stacked on top of a washing machine, or freestanding Customer Care Center, 1-800-898-1879, www.
PROGRAM TABLE The table indicates the power consumption and time values for drying of a test batch of laundry with various loads and after spinning at various rates, consistent with the EN61121. The following requirements apply to the consumption values specified below. Inlet air temperature room temperature Inlet air humidity 50–60% Drying temperature Normal Full load (11kg/24lbs) Program time approx. (h:min) Energy consumption approx. (kWh) Program time approx. (h:min) Energy consumption approx.
DISPOSAL Disposal / recycling of packaging Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indicates that the product should not be treated as normal household waste. The product should be taken to an authorized collection centre for waste electric and electronic equipment processing.
QUICK GUIDE SORT THE FABRICS 1. Sort the fabric by type and by how heavily soiled the laundry is. Observe the drying symbols on the laundry labels. Close the zippers, hook-and-loop fasteners and buttons. SWITCH ON THE MAIN ON/OFF SWITCH (ON/OFF) 2. OPEN THE DRYER DOOR AND INSERT THE LAUNDRY. Before doing so, make sure the drum is empty. 3. CHOOSE THE DRYING PROGRAM. Turn the program selector knob to the desired drying program. 4. CHOOSE THE PROGRAM SETTINGS.
www.askona.com TD85.