Operating Instructions Tumble dryer Save these instructions for future reference Dear ASKO Customer, Thank you for choosing this quality product from Scandinavia, which was made in Sweden. We want you to feel assured that the inside of your new machine is just as good as the outside and that the ethics and standards that went into the production of this machine are just as high as the quality and performance that you will receive from it. We hope that this product will give you many years of pleasure.
Contents Before using your machine for the first time Do not tumble dry Important safety instructions Installation Grounding instructions Interrupting a program Transport/Winter storage Packing material Disposal Child safety General Child-safe Start Activating/deactivating Child-safe Start Description of the tumble dryer Front panel Advice and tips before you tumble dry Have the clothes been spun? Materials that can be tumble dried Materials that should not be tumble dried Static electricity Backlighting Op
Contents Quick guide Fabrics Turn on the main power switch Load the laundry Select a program and any options Press the Start button Drying program finished Once tumble drying has finished 32 32 32 32 32 32 32 32 Customer Care Center 1-800-898-1879 www.askousa.
Before using your machine for the first time Do you need this Use&Care Guide in spanish? Log onto www.askousa.com/customercare to download. ¿Necesita esta Instrucciones de uso y cuidado en español? Entre en www.askousa.com/customercare y descárguesela. Do not tumble dry Certain materials are not suitable for tumble drying. Always check and follow the instructions on each item's laundry label. You can find more information in the "Advice and tips before you tumble dry" chapter.
Important safety instructions Save these instructions for future reference Installation See the "Installation" chapter. Warning! WARNING - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: • Read all instructions before using the appliance.
Important safety instructions Grounding instructions A) Grounding instructions for a grounded, cord-connected appliance In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance (Canadian market only) is equipped with a cord having an equipmentgrounding conductor and a grounding plug.
Child safety General Activating/deactivating Child-safe Start Do not allow children to play with the tumble dryer. The tumble dryer does not start automatically when the door closes (for example, if a child closes the door from inside the dryer). In order to prevent children from starting a program or changing one that has already started, you can activate the Child-safe Start option. Activating/deactivating Child-safe Start 1. Turn off the machine using the main power switch. 2.
Description of the tumble dryer 1 2 4 5 6 Main power switch Condensed water container Panel Serial number tag and rating plate Lint filter holder 6. 7. 8. 9. Outer door Fan (behind hatch) Condenser Lint filter 3 7 1. 2. 3. 4. 5. 8 99 8 Customer Care Center 1-800-898-1879 www.askousa.
Front panel 1 2 1 Main power switch 2 Program selector 3 Display window 3 4 5 6 4 Options buttons 5 Start 6 Stop Customer Care Center 1-800-898-1879 www.askousa.
Advice and tips before you tumble dry Here are some tips that may help you before you begin tumble drying. Materials that should not be tumble dried Have the clothes been spun? This symbol means that the material is not suitable for tumble drying. Certain materials may melt or become a fire hazard if exposed to heat and others can lose their shape or shrink. Items to be tumble dried should be spun at 1000 rpm or faster. Higher spin speeds save both energy and drying time.
Operating instructions Warning! To reduce the risk of electric shock or injury to persons, read the "Important Safety Instructions" section before operating this appliance. Below are step-by-step instructions to help you achieve the best possible tumble drying results. 1 Sort your fabrics Auto Normal and Auto Delicate These programs shut off the heat once the load is dry but before it is "bone-dry". The Auto Normal program shuts off the heat slightly later than Auto Delicate.
Operating instructions Menu overview 1. Auto Heavy 2.Auto Normal 3. Auto Delicate 4. Auto Iron Dry Time remaining 1:45 5. Timed dry Stop Start 6. Air fluff programme Low temperature Time Saver Anti Wrinkle function Buzzer Volume Note! The illustration shows an example of a program. Program chart Here we present a few examples of the energy and time consumption of a few different program settings.
Operating instructions 5 Delayed Start Selecting Options By selecting options, you can tailor a drying program to suit your requirements. The machine remembers which options you choose for each program and uses them (with one exception – Delayed Start) the next time you select the same program. You can, of course, change this if you want. Temperature You can choose Temperature Low with all programs except Air Fluff. • Select Temperature Low by pressing the button under the symbol.
Operating instructions 6 Press the Start button 7 Drying program finished Remaining drying time An estimate of the remaining drying time will be shown on the display a few minutes after the drying program starts. For example, 1:35 means it will take approximately 1 hour and 35 minutes for the load to dry. If the Anti Wrinkle option has been selected, the drum will rotate for 3 seconds every minute for 2 hours after the program is finished.
Operating instructions To install the automatic drain hose, please see the section titled Installation 8 Once drying has finished Turn off the main power switch. Remove the clothes and close the door to prevent small children from climbing into the machine. Customer Care Center 1-800-898-1879 www.askousa.
Settings You can alter the following settings: • Buzzer Volume • Language • Child-safe Start Buzzer Volume You can choose to have the machine notify you when a program has finished or if an error has occurred. • Select Buzzer Volume by pressing the button under the symbol. • The lamp above the symbol lights when Buzzer Volume is selected. Select language Follow these instructions: 1. Turn off the machine using the main power switch. 2. Press the main power switch and the Start button. 3.
Care and maintenance instructions Cleaning the lint filter Cleaning the outside of the machine The lint filter must be cleaned after each load. If you have very hard water, this can cause limescale deposits in the lint filter. Check for any limescale deposits when cleaning the lint filter and, if necessary, wash the filter by hand. Additionally, the filter should be cleaned with hot water, detergent, and a soft brush quarterly. 1. Grasp the filter handle and pull it toward you. 2.
Care and maintenance instructions Cleaning the condenser The condenser should be cleaned at least three times a year. If you have pets, the condenser must be cleaned more frequently. 5. Replace the condenser. When refitting the condenser, check that it is replaced correctly. The top of the condenser is labeled "upp", "up", and "oben". 1. Turn off the main power switch. UPP UP OBEN 2. Replace the lower plinth. 6.
Troubleshooting The machine will not start Drying takes too long Check • that the door is properly closed. • that the main power switch is on. • that the machine is not programmed to start at a specific time (e.g., 13.30) • that any plug is connected. • that the fuses (circuit breakers) in your house are intact. Flip the dryer breaker off and then back on to make sure. You can not always tell from the outside if the circuit breaker has tripped.
Technical information Technical data Height: Width: Depth: Weight: Cylinder volume: Max. drying capacity: Speed: Rated power: Drum material: Outer casing material: Setup Drain: 33 1/2'' (850mm) 23 7/16'' (595mm) 23,0" (585mm) 104lb (47kg) 29,3gal (111l) 15lb (7kg) 52 rpm See serial number tag and rating plate. Stainless steel Powder-coated and hot-galvanized sheet steel or stainless steel. Stacking or freestanding 67" (1.7m) polypropylene hose 79" (2.
Service and guarantee It is important to register your product warranty by logging onto www.askousa.com/customercare/registration and filling out all required fields within 90 days from the date of purchase. After doing so, you will be e-mailed a certificate that will extend the original warranty for one additional year. If you do not have access to the internet, complete the warranty card included with the product and mail it to the address on the warranty card within 90 days of the date of purchase.
Service and guarantee Warranty ASKO Appliances Inc. will not pay for: How to contact the ASKO Appliances Inc. Service calls to: 1. Correct the installation of the appliance. 2. Repair damage due to shipment, delivery, installation, misuse or abuse. 3. Instruct how to use the appliance. 4. Replace house fuses or correct house wiring. 5. Correct house plumbing, including drainage problems related to improper installation. 6. Clean or service air device in drain line.
Installation instructions A. Freestanding WARNING! The tumble dryer can be positioned beside the washing machine. WARNING - Risk of fire. Install the clothes dryer according to the manufacturer's instructions and local codes. Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the applience manufacturer as suitable for use with clothes dryers.
Installation instructions C. Built-in ASKO dryers can be installed beneath a cabinet or worktop with a minimum height of 34” (864 mm). There must be a gap of about 1/2” (12 mm) all around the machine, including between the rear edge of the machine top panel and the back wall. The opening width must be at least 24-1/2” (622 mm). The condensing models work best when they have good air circulation.
Installation instructions 5. Fit the plastic cups so that the "tags" marked with arrows are against the front edge or side edge of the cover and press them firmly onto the cover. Then break off the remaining tabs. How to assemble the stacking kit: 1. Undo the anti-tip device. 2. Remove the two screws indicated on the back of the washing machine. 6.
Installation instructions Adjusting the feet Electrical installation Screw the feet in or out so that the tumble dryer is steady and balanced on the floor or on the washing machine. Then tighten the lock nuts. Warning! Lock nut The receptacle on the rear of the machine is designed to accommodate ASKO washers ONLY (rated 208–240 V.) To use this receptacle, you must use the ready-fitted plug supplied with the washing machine or an equivalent.
Installation instructions Electrical Connections Connecting a 3-wire Power Cord Warning! Warning! Read the Electrical requirements and grounding instructions before connecting the tumble dryer. Before starting this procedure, be sure the power is turned off at the breaker/fuse box. Electric models of the dryer are manufactured for a 3-wire connection system. The dryer frame is grounded by a link to the neutral conductor on the dryer terminal block.
Installation instructions 5. Connect ground (center) wire of power supply cord to the center, silver-colored terminal screw. Tighten screw. 6. Connect the other wires to outer screws. 7. Tighten the strain relief screws. 8. Replace terminal box cover on back of dryer. 9. Plug dryer into wall receptacle. 10. Turn power on at breaker/fuse box. Connecting a 4-wire Power Cord Warning! Before starting this procedure, be sure the power is turned off at the breaker/fuse box. 4 7 8 6 5.
Reversing the door 1. Hinge pins (top and bottom) 2. Cover washer 3. Plastic plugs (on the upper and lower edges) 4. 5. 6. Customer Care Center 1-800-898-1879 www.askousa.
Reversing the door You can choose whether the door is hung on the right or the left. Follow these instructions: 1. Remove the Toe kick. 2. Unscrew the 2 screws on the hinges. 6. Move the plastic plugs on the upper and lower edges of the door. Use a flat screwdriver to remove the plugs. 3. Lift the door up and remove it. Support the door while doing this. 4. Remove both door pins (top and bottom). Fit them on the opposite side of the door. Refit the hinges. 7.
Notes Customer Care Center 1-800-898-1879 www.askousa.
Quick guide 1 2 3 4 5 6 Fabrics Press the Start button • Dry fabrics of the same type together to ensure they dry as evenly as possible. Turn on the main power switch Drying program finished • "END" appears on the display when the program is finished. If the Anti Wrinkle option has been selected, the drum will rotate for 3 seconds every minute for 2 hours after the program is finished. • Clean the lint filter after each load. Load the laundry • Close the door.
