Use & care guide

20
Custumer Care Center
1-800-898-1879
www.askousa.com
4. Fit the plastic cups so that the tabs marked
with arrows are against the front of the con-
trol panel and side edges and press firmly
onto the top of the unit. Then break off the
remaining tabs.
5. Open the knock-out holes on the back of
the dryer (if there are any) using a hammer
and a screwdriver. Do not remove the knock-
out pieces, simply bend inward!
6. Push the tumble dryer in under the metal
angles, keeping the front edge raised 0.5-1"
(1-2 cm).
7. Lower the tumble dryer’s front feet into the
plastic cups and adjust the legs so that the
dryer is balanced.
How to install the stacking kit:
1. Remove the two screws indicated on the
back of the washing machine.
2. Secure the anti-tip device using the
screws as shown in the picture.
3. Attach the plastic cups for mounting the
tumble dryer’s front feet to the washing
machine’s top cover. This is essential, as once
the tumble dryer’s feet are resting in the
plastic cups you know the dryer is correctly
positioned on the washing machine.
Break off tab
A on the cup fitted on the right
side and tab B on the cup fitted on the left
side. Then remove the paper from the self-ad-
hesive surface under the plastic cups.
A
B