Use & care guide

24
Custumer Care Center
1-800-898-1879
www.askousa.com
13. Secure the hinge attachment using the
screws in the sequence shown in the picture.
14. Replace the screw that was removed in
figure 11.
15. Replace the lower front plate.
9. Insert the cover washer in place of the
door magnet.
10. Insert the screws so that the door mag-
net and cover washer are held in place.
11. Remove the screw indicated. If using a
condenser dryer, you must also open the
condenser panel.
12. Then fit the door securely on the right
side of the machine.
1
2
2
1
2
2
1
3
2