User Manual

89
The System Setup Pages
Operational Notes
Navigation
The System Setup pages work the same way
all other modules do, but here are some
reminders:
• To access the next or previous page, use
the Page Down / Up arrows.
• Cycle forward to the desired page quickly
by pressing [SYSTEM SETUP] repeatedly.
• Use [SHIFT] + the Page Down / Up arrows
to jump to the last page or back to rst
page.
Access, Action
• Some elds have Control buttons that
execute a function, such as the Factory
Reset. These are indicated by the word
(action) in the charts.
• Some pages have access buttons that
open another page. These are indicated by
the word (access) in the charts. Follow the
instructions in the Left display to calibrate
the selected item.
Saving the Settings
Press [EXIT] or any module button to save
System Setup changes. The message “System
saving...” will be shown in the Left display for
about 1 second. Note that sound output is
silenced while the settings are being saved.
Save System State
You can specify which patch you see rst
when the Hydrasynth is powered up. It’s a
simple process:
• Select your favorite patch (that’s the hard
part).
• Hold [SAVE] and press [SYSTEM SETUP].
• The display shows “STATE SAVED!” to
conrm the action.
For the desktop unit this process also saves
the Pad Mode (Octave Row, Fretboard, etc.),
the Pad Scale, and the Pad Key.
Notes About Notes
Some parameters are self-explanatory, but others have additional information below the chart.
Master: Page 1
Control knob Function Range Description
1 Transpose - / +11 semitones Transpose keys, pads chromatically
2 Tuning 380 to 500 Hz Sets center tuning frequency
3 O’Scope On, O Toggles waveform animation in
Left display
4 Memory protect On, O Prevents overwriting of patches
5 Left contrast 0 to 127 Sets contrast for Left display
6 Right contrast 0 to 127 Sets contrast for Right display
7 LED Dim On, O Toggles LED brightness between
50% and full
8 Light show O, 10 / 30 seconds,
1 / 5 / 15 / 30 minutes
Sets timeout period for onset of
light show