User's Manual
Table Of Contents
- Important Safety Instructions
- Welcome to Hydrasynth!
- Quick Start Guide
- Overview
- Hydrasynth Desktop
- Understanding the Modules
- The Oscillator Group
- The Mixer Module
- The Filters and their Controls
- The Amp Module
- The Envelopes
- The LFOs
- The Effects
- The Voice Module
- Ribbon Controller (keyboard only)
- The Arpeggiator Section
- Mastering the Macros
- The Mod Matrix
- The CV / Gate Section
- Patch Management
- The System Setup Pages
- Control Combinations
- Scales
- Hydrasynth Specifications
- Declaration of Conformity
71
Macro Button Response
There’s a separate chapter for The System Setup Pages (p.84), but this information aects how
the Macro buttons behave on the Home page and while auditioning a Macro during editing.
To access the Macro Button settings, press [SYSTEM SETUP] and press the Page Down arrow
once to reach page 2. Use Control knob 4 to select one of the four options: Toggle, Trigger,
Switch, and Reset.
• Toggle: The Macro button toggles
between the Button Value setting and the
current Control knob value.
• Trigger: The Macro button triggers the
Button Value On when pressed and O
when released.
• Switch: Only one Macro button can be
selected at a time.
• Reset: The Macro button resets the cor-
responding Macro Knob to zero
Using a Macro button on the Home page while holding [SHIFT] changes the behavior.
When MacroBtn setting is... [SHIFT] + Macro button response is...
Toggle Trigger the Button Value On when pressed and O when
released.
Trigger Hold the Button Value setting until released manually
Switch Allow more than one Macro Button to be selected
Reset (no response)