Installation Instructions

Installation of motion sensor or PIR sensor
It could be easily installed by using a straight screwdriver . Use a flat-blade screwdriver to unscrew
the plug and remove the plug. And then, adjust the lamp power to the maximum
(otherwise the sensor will act abnormally).
install motion sensor or PIR sensor and tighten it.
Note: the motion sensor has no dialing code, and a remote control is needed for adjustment.
Please refer to the instruction for remote control adjustment.
1
2
3
4
MUST MAX POWER
80W 100W 120W
MUST MAX POWER
0
120W
100W
80W
1.Continuous dimming
1
2
3
2.Segmented dimming
WARNING – Risk of fire or electric shock. LED Retrofit Kit installation
requires knowledge of luminaries electrical systems. If not qualified,
do not attempt installation. Contact a qualified electrician.
WARNING – Risk of fire or electric shock. Install this kit only in the
luminaires that have the construction features and dimensions
shown in the photographs and/or drawings and where the input
rating of the retrofit kit does not exceed the input rating of the
luminaire.
WARNING – To prevent wiring damage or abrasion, do not expose
wiring to edges of sheet metal or other sharp objects.
Do not make or alter any open holes in an enclosure of wiring or
electrical components during kit installation.
THE RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A
LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION
SHALL BE DETERMINED BY AUTHORITIES HAVING
JURISDICTION. PRODUCT MUST BE INSTALLED BY A
QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE
APPLICABLE AND APPROPRIATE ELECTRICAL CODES.
THE INSTALLATION GUIDE DOES NOT SUPERSEDE LOCAL
OR NATIONAL REGULATIONS FOR ELECTRICAL INSTALLATIONS.
SUITABLE FOR DAMP LOCATIONS.
ADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF
A FREE STANDING PORTABLE LUMINAIRE.
USE ONLY WITH A PORTABLE TABLE LAMP THAT IS PROVIDED
WITH A SHADE.
USE IN PORTABLE TABLE LAMPS IN WHICH THE DISTANCE
FROM THE BOTTOM OF THE BASE TO THE TOP OF THE
LAMPHOLDER DOES NOT EXCEED THREE (3) TIMES THE
MINIMUM BASE DIAMETER.
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY
EXITS” or “NOT FOR EMERGENCY LIGHTING.
MIN. LAMP COMPARTMENT DIMENSIONS(L x W x H)
WARNING:
-5-
-6-
AVERTISSEMENT:
INSTALLÉ PAR UN ÉLECTRICIEN QUALIFIÉ CONFORMÉMENT
AUX CODES ÉLECTRIQUES APPLICABLES ET APPROPRIÉS.
LE GUIDE D'INSTALLATION NE REMPLACE PAS LES
RÉGLEMENTATIONS LOCALES OU NATIONALES POUR LES
INSTALLATIONS ÉLECTRIQUES.
CONVIENT AUX EMPLACEMENTS HUMIDES
LE DISPOSITIF CONSTITUE UN POIDS SUPPLÉMENTAIRE
CE QUI PEUT CAUSER L'INSTABILITÉ D'UN LUMINAIRE
PORTATIF AUTONOME
UTILISER UNIQUEMENT AVEC UNE LAMPE DE TABLE DOTÉE
D'UN ABAT-JOUR
UTILISER AVEC UNE LAMPE DE TABLE POUR LAQUELLE LA
DISTANCE ENTRE LA PARTIE
INFÉRIEURE DU SOCLE ET LA PARTIE SUPÉRIEURE DE LA
DOUILLE DE LAMPE N'EST PAS SUPÉRIEURE À 3 FOIS LE
DIAMÈTRE MINIMAL DU SOCLE
NE CONVIENT PAS AUX SORTIES DE SECOURS
DIMENSIONS MIN DU COMPARTIMENT ABRITANT L'AMPOUL
Model Number
Minimum Lamp Compartment
Dimension(mm)(H)x(L)x(W)
AST-CLW08E-054WXYA1-adck
420 X 210 X 210
AST-CLW08E-063WXYA1-adck
420 X 230 X 230
AST-CLW08E-080WXYZA1-adbck
AST-CLW08E-100WXYZA1-adbck
AST-CLW08E-120WXYZA1-adbck
420 X 230 X 230
440 X 240 X 240
440 X 260 X 260
-8--7-
Avertissement- Precautionnez-vous contre des chocs électriques.
L'installation des pièces de rechange LED est seulement en charge
des professionnels.
Precautionnez-vous contre feu. Installer des pièces de rechange selon
les spécifications, veiller à ce que la puissance d'entrée ne dépasse
pas la puissance d'entrée de remplacement de la lampe.
Ne faites pas de contact avec le câble pointus ou métalliques,afin
d'éviter le fil usé.
Ne pas modifier la structure du circuit fermé et les composants
électroniques ou forage sur celui-ci lors de l'installation des pièces
de rechange
LA TROUSSE DE RÉNOVATION EST ACCEPTÉE COMME
UN ÉLÉMENT D'UN LUMINAIRE OÙ L'ADÉQUATION DE
LA COMBINAISON DOIT ÊTRE DÉTERMINÉE PAR LES
AUTORITÉS COMPÉTENTES. LE PRODUIT DOIT ÊTRE.
Model Number
Minimum Lamp Compartment
Dimension(mm)(H)x(L)x(W)
420 X 210 X 210
420 X 230 X 230
420 X 230 X 230
440 X 240 X 240
440 X 260 X 260
AST-CLW08E-054WXYA1-adck
AST-CLW08E-063WXYA1-adck
AST-CLW08E-080WXYZA1-adbck
AST-CLW08E-100WXYZA1-adbck
AST-CLW08E-120WXYZA1-adbck