User's Manual

86
Bearer setting
9.7 Bearer setting
The bearer settings are to change the GPRS settings and the CSD set-
tings. These settings should be set according to the service offered by
your provider and should not be changed unless your service pro-
vider advises you to do so.
To enter the bearer settings:
1. If the phone is turned off, turn it on as described in “Turning the
phone on and off” on page 9.
2. When the idle screen appears, press the left function key to
display the menu screen.
3. Use the joystick key to highlight the Settings icon and press the
left function key or the joystick key to select it.
The settings menu is displayed.
4. Use the joystick key to highlight the Bearer Setting option.
5. Press the left function key to select it.
6. Use the joystick control to highlight either the GPRS or CSD
option and use the left function key to select it.
7. Press the right function key to display the options menu.
8. Use the joystick key to highlight an option from the options
menu and press the eft function key to select it.
AsMobilePavoUM.book Page 86 Friday, June 3, 2005 4:08 PM