User's Manual

Advanced Configuration (Expert Users Only) 2–9
PlugLAN 8350 Wireless SmarTAP Installation and User’s Guide
Backing Up Configuration Settings
The configuration settings for your PlugLAN 8350 Wireless SmarTAP are
recorded in a binary file called config.bin. Using the Backup Settings page,
you can save this file to a location for future restore and then restore the
settings when necessary. To display this page, click System in the Web
Management utility menu bar and then click Backup Settings in the
navigation panel.
Figure 2-10: Backup Settings Page
To save the file containing the configuration settings:
1. Click the Save button on the Backup Settings page.
2. When the dialog box in
Figure 2-11 appears, be sure Save to Disk is
selected and click Save to save the config.bin file. The Downloads box
shows the location to where the file was downloaded. You can click the
name of this folder in the Downloads box to open the folder.
3. To open the file, use the Open link in the Downloads box. To remove the
file, click the Clean Up button or the Remove link in the Downloads box.
Figure 2-11: File Download Dialog Box
NOTE: If you save the configuration settings, you can use the procedure under
Restoring Backup Settings below to restore them if necessary.